Industrial Large Format Cold Laminator 64 Inches Signage Laminator 600W

For print shops transitioning to large format or specializing in materials like vehicle wrap vinyl, the choice of a laminator often comes down to budget versus features. The MF1700-B6, a Manual Cold Laminator with an unexpected twist—a Pneumatic Lifting System—is bridging this gap.

While the manual cold lamination capacity offers significant cost savings and unparalleled control over your media speed, the pneumatic lift is where the true professional advantage lies.

Traditional manual laminators use hand wheels to adjust the roller height and pressure. This system is prone to human error; if the left and right wheels are not turned the same amount, the rollers become unparallel. This pressure imbalance results in:

• Wrinkles and Bubbles: Uneven pressure distribution leads to adhesive failure.
• Wasted Material: Print media is costly. One bad laminate run is often a total loss.
• Slow Setup Times: Operators must constantly check and recalibrate the roller gap.

The MF1700-B6 leverages the reliability of a high-end system's compressed air cylinder (pneumatic) to control the roller gap. This ensures the 130mm silicon rollers lift and descend with perfect, synchronized precision. The result is instant, even pressure every single time, drastically cutting setup time, eliminating material waste, and guaranteeing a flawless finish, regardless of the print substrate's thickness.