Sign In | Join Free | My benadorassociates.com
benadorassociates.com
Products
Search by Category
Home > Supplies and Equipment >

Seawater Wastewater Ultrafiltration Membrane Module UPVC Housing UF Membrane Module

Categories Ultrafiltration Membrane
Brand Name: SINOMEMB
Model Number: SNU-HO-2860
Certification: NSF
Place of Origin: China
MOQ: 5
Packaging Details: Standard export packaging
Membrane Material: PVDF/PES
Filtration Mode: Crossflow
Core Components: uf membrane
Housing: UPVC
Application: Electrophoretic paint concentration
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
  • Product Details
  • Company Profile

Seawater Wastewater Ultrafiltration Membrane Module UPVC Housing UF Membrane Module

The core SINOMEMB ® series SNU-HO-2-860 hollow fiber UF membrane element is suitable for systems with a capacity greater than 50m 3 /hr (220 gpm) . Compared with longer membrane modules, shorter membrane modules (60 inches) provide higher separation efficiency and can adapt to a wider range of influent water quality , helping customers to achieve more economical membrane system design , and can be widely used on the surface Various water treatment applications such as water, well water, seawater , industrial wastewater, and secondary and tertiary treatment of sewage .

Ø Membrane element specifications

Membrane element model

Effective membrane area

ft 2 (m 2 )

Effective volume

G( L )

weight empty /full of water

( kg )

SN U-HO-2-860539(50)9.3(35)48/83
Inlet sizeWater outlet sizeConcentrated water outlet sizeMembrane Polymer
DN50DN50DN50PVDF
Membrane inner diameter/outer diameter (mm)Filtration precision (μ m )shell materialSealant material
0.7/1.30.03U-PVCepoxy resin
  • Membrane element operating parameters
Filtration flux ( 25℃ ) L/㎡·hr40-120
Flow range m³/hr2.0-6.0
Maximum influent turbidity (NTU)≤300
Maximum resistance to residual chlorine (NaCLO) (ppm)Continuous: 200; Momentary: 2000
Maximum anti-suspended solid capacity (ppm)≤100
Maximum influent particle size ( μm )300
Working temperature (℃)1-40
pH range2-11
Maximum water production (L/m³·h)150
Maximum inlet pressure (Mpa)0.625
Maximum transmembrane pressure difference (Mpa)0.21
Maximum backwash pressure (Mpa)0.25
Maximum air flushing flow rate (Nm³/hr)12
General backwash cycle (min)15-60
General backwash time (sec)30-60
General backwash flow rate (L/m³·h)100-360
General chemical enhanced backwash cycle (day)1-15
General chemical backwashing time (min)1-15
General chemical cleaning cycle (day)30-180
General chemical cleaning time (min)90-480
General chemical cleaning chemicalsNaClO or H2O2 500ppm , NaOH (PH≤13), HCl (PH≥1 )
How to run /operateoutside-in / full flow or cross flow filtration
Expected water production SDI≤2.5
Expected product water turbidity NTU≤0.1
Bacteria removal rate (log)>6
E. coli removal rate (log)>6
service life≥3 years under standard conditions

Ø UF membrane element size

LL1L2L3L4Diameter Φair intake
1860mm1500mm1630mm1820mm180mm225mmRP 3/8”
(73.2)in(59.1)in(64.2)in(71.7)in(7.1)in(8.9)in/

Ø Operation Guide

During the operation of the UF system, it is necessary to avoid sudden changes in pressure during system start-up, shutdown, operation, cleaning, maintenance, etc., as well as exceeding the maximum withstand pressure specified in this manual, to prevent possible membrane breakage, sealing, etc. End fall off, membrane shell cracking and other serious damage consequences; this series of products have been treated with anti-corrosion and membrane wire protection before leaving the factory, and the inner membrane wire of the module is in a semi-dry state. For manual operation, the water production rate should be set to 50% of the design water production rate, and the initial water production must be discharged directly and cannot be used as product water.

Ø Product usage tips

The normal start-up and normal cleaning and maintenance of the UF system are the key to ensure the long-term normal use of membrane products. Before starting the system, it should be ensured that the parameters of each valve, instrument, pre-processing equipment, signal transmission equipment, power equipment, etc. meet the design specifications and requirements, so as to ensure the safe, stable and up-to-standard operation of the overall system. Please refer to the product technical manual for the debugging and testing work of the system in the early stage.

Ø Disclaimer

Failure to operate in strict accordance with the operating limits and guidelines set forth herein voids our limited warranty. If the UF system is out of service, please inject protective liquid inside the membrane module for anti-corrosion treatment, so as to avoid the increase of maintenance cost caused by the large number of microorganisms in the system.

Buy Seawater Wastewater Ultrafiltration Membrane Module UPVC Housing UF Membrane Module at wholesale prices
Send your message to this supplier
 
*From:
*To: Sinomemb Environment Technology (beijing) Co.,
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0