ODM High Temp Industrial Electric Heat Treatment Furnace For Ceramic Sintering

High Temp. Box Furnace Chitherm Hbf52-17ohigh for Ceramic Sintering 1620*1960*1220mm W*H*D

High-temperature sintering processes are widely used for ITO targets, microwave ferrites, magnetic materials, electronic components, ceramic filters, and similar products.

• Rated Temp.: 1650ºC
• Max Temp.: 1700ºC
• Effective Dimensions: 350 * 300 * 500mm(W*H*D)
• Heating Method: U-shaped Silicon Molybdenum Rod
• Process Atmosphere: Air/Oxygen
• Temperature Control Stability: ±1ºC, with PID parameter self-tuning function
• Temperature Uniformity: better than ±5ºC (insulation 2 hours at 1650ºC test)
• Thermocouple: B Type
• Temperature control points: 1
• Number of Temp. Profiles: 4*16 steps
• Exhaust chimney: Located at the top of the furnace chamber, with an automatically opening/closing chimney cover
• Alarm protection: Audible and visual alarms for over-temperature, thermocouple break, and other faults, with power cut-off protection upon over-temperature alarm
• Max Heating Power: 25kW
• Insulation Power: ≤ 10kW
• Heating Speed: RT~1200ºC≤5ºC/min,1200~1700ºC≤2ºC/min
• Surface Temperature Rise: ≤ 35ºC
• Weight: about 950kg
• Furnace Dimensions: about 1620*1960*1220mm (W*H*D)
• Appearance Color: light gray

• Environmental conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance
• Process air conditions: Clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 2 - 6m3/h
• Ventilation system: Non-contact access to the user pumping system, pumping capacity is greater than 10m3/h
• Ground requirements: Level, no obvious vibration, bearing capacity > 300Kg/m2
• Power conditions: Capacity greater than 34kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz(according to local situation). Live wire: yellow, green, red, neutral wire: blue, ground wire: yellow-green
• Installation site: 2000mm*3000mm*1500mm (W*H*D), installation area greater than 3m2