High Temperature Controlled Atmosphere Box Furnace Muffle For Alumina Ceramics Sintering

Chitherm Hbf125-17 High Temperature Box Furnace with 500*500*500mm effective chamber dimensions and air atmosphere control.

Primarily designed for high temperature binder burn off and sintering processes of zirconia ceramics, alumina ceramics, ferrites, magnetic materials, electronic components, and ceramic filters.

• Rated Temperature: 1600ºC
• Maximum Temperature: 1700ºC
• Effective Dimensions: 500 × 500 × 500mm (W×H×D)
• Heating Method: U-shaped MoSi2 Heating Elements
• Process Atmosphere: Air
• Temperature Control Stability: ±1ºC with PID parameter self-tuning
• Temperature Uniformity: Better than ±5ºC (after 2 hours insulation at 1600ºC)
• Thermocouple: B Type
• Temperature Control Points: 1
• Temperature Measurement Points: 1
• Temperature Profiles: 19×19 (controller can save 19 profiles with 19 steps each)
• Exhaust System: One exhaust port with auto cover
• Alarm System: Sound and light alarms for over temperature, thermocouple failure, with automatic power cutoff
• Maximum Heating Power: 45kW
• Insulation Power: ≤25kW
• Heating Rate: RT - 1200ºC ≤ 5ºC/min, 1200 - 1700ºC ≤ 2ºC/min
• Surface Temperature Rise: ≤ 35ºC
• Weight: Approximately 1100kg
• Furnace Dimensions: Approximately 1770×2150×1250mm (W×H×D)
• Appearance Color: Light gray

• Environmental Conditions: Temperature 0 - 40ºC, humidity ≤ 80% RH, no corrosive gas, no strong airflow disturbance
• Process Air Conditions: Clean, dry, oil-free compressed air, pressure 0.2 - 0.4Mpa, gas consumption 4 - 12m³/h
• Ventilation System: Non-contact access to user pumping system with capacity > 15m³/h
• Ground Requirements: Level surface, no significant vibration, bearing capacity > 500Kg/m²
• Power Conditions: Capacity > 60kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz
• Installation Site: Minimum 2500mm×3500mm×2500mm (W×H×D), area > 7m²