High Temperature Rotary Furnace Electric Sintering Alumina Tube Horizontal ISO

High Temperature Sintering ISO Certified 1050°C RTF3042 0611 Clean Rotary Furnace Electric Furnace Sintering Furnace

High-cleanliness quartz rotary furnace tubes are utilized for the heat treatment processes of high-end powder materials, such as ITO precursors and other granular or particulate substances.

• Rated temperature: 1000°C
• Maximum temperature: 1050°C
• Furnace tube material: High-purity quartz, clean and pollution-free
• Furnace tube specifications: Inner diameter Φ300×4230mm
• Loading structure: A loading bin is provided at the front end, with a screw feeder for automatic feeding, made of SUS316L
• Discharging mechanism: A discharge bin and a discharge pipe opening are provided at the rear end, made of SUS316L, with a discharge port size of DN100
• Heating element: Ceramic fiber heater
• Number of temperature zones: 6
• Number of temperature control points: 6
• Thermocouple type: N scale
• Temperature controller: Imported Yokogawa temperature controller from Japan, with PID parameter self-tuning function
• Temperature control accuracy: ±1°C, with PID parameter self-tuning function
• Alarm protection: Over-temperature, open circuit, and other audible and visual alarm protection functions
• Maximum heating power: 48 kW
• Idle furnace holding power: ≤24 kW
• Heating rate: ≤10°C/min
• Surface temperature rise: <35°C
• Equipment capacity: 40 kg/24h
• Equipment weight: Approximately 3000 kg
• Appearance color: Light gray
• External reference dimensions: 1215×2500×6200 mm (W×H×L), actual product dimensions may vary

• Environmental Conditions: temperature: 0~40ºC, humidity ≤ 80%RH, no corrosive gas, no strong airflow disturbance
• Gas Source Conditions: High-purity nitrogen, with a purity of 99.999%, pressure range of 0.2 - 0.4 MPa
• Ventilation System: non-contact access to the user pumping system, pumping capacity is greater than 30 m³/h
• Ground Requirements: horizontal, no obvious vibration, load-bearing > 500 Kg/m²
• Power Condition(TBD): capacity > 64kVA, 3-phases 5-lines, voltage 220/380V, frequency 50Hz. Fire line: yellow, green, red, Zero line: blue, Ground line: yellow-green
• Installation Site: 8000mm×2000mm×3000mm(L×W×H), with an installation area greater than 16m²