Name: TDD 22W Dual Channel Digital Linear RF Power Amplifier 14201530M MIMO PA
Brand: Hincn
Price: 579.00 USD

Home > Springs >

TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA

Categories	RF Power Amplifier
Brand Name:	Hincn
Model Number:	HCTD-4055-2
Place of Origin:	China
MOQ:	1 pc
Price:	US$579.00~US$629.00
Payment Terms:	,T/T,Western Union,MoneyGram,D/P,D/A,L/C
Supply Ability:	359pcs/month
Delivery Time:	7~14 working days
Packaging Details:	carton package
Power:	2*2W
Frequency:	1420~1530MHz or other frequencies
Size:	405512mm
Power supply voltage:	10~16V
Material:	made of pure aluminum
RF connector:	SMA or MCX

Contact Now

Add to Cart

Company Info.

Hincn Limited

Verified Supplier

View Contact Details

Product List

Haven't found right suppliers
Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
And this service is free of charge.
we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!

Submit Buying Request

Product Details
Company Profile

TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA

Performance advantages

Extremely small size, dual-channel power amplifier (MIMO-PA), high linearity, extremely high reliability, no damage to the power amplifier even during open circuit or short circuit.

Specifications

Model number: HCTD-4055-2
Product name: TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA
High linearity
Number of channels: 2 channels, symmetrical on both left and right sides.
Transmission Power: Nominal 2W for 2 channels, typical value 2-3W*2 . This enables longer transmission distances and more stable wireless transmission.
Frequency range: 1420~1530MHz or other frequencies
Gain: ≥12dB± 0.5 dB (TX mode)
Shoulder ratio: ≥25~30dB (at 8MHz bandwidth, DVB-T, 2/8K mode modulation signal, Deviation from the center frequency 4.3MHz)
In-band fluctuations: ≤ ±1.25dB (typical value±0.75dB)
Input/output interface: SMA or MCX
TX Maximum input power: 25dBm*2 channel
RX Maximum input power: 20dBm*2 channel
Third order intermodulation: ≤-30~36dB@Pout=33dBm/ ≤-20~30dB@36dBm
ACPR: ≤-30~-36dB@Pout=33dBm/ ≤-20~30dB@36dBm
Harmonic suppression: ≤-30dBc
Output VSWR: ≤1.5 (load 50Ω)
Relative group delay: ≤20ns
RF switch switching time: turn on time≤1us / switch off time ≤0.2us
Power amplifier transmit-receive isolation degree: ≥45dB
Receive gain: 9± 2 dB* 2 or 2dB ± 0.5dB* 2 ( RX mode, the maximum gain of the low-noise amplifier can be set and changed according to the requirements up to 20dB).
Control mode: TTL 0/1.8～5V level (Or, automatic detection of the input power can be used to achieve automatic transmission and reception. However, the transmission delay will be slightly increased, but it can still be used normally. EN high level(1.5~5.5V): Power amplifier is in transmitting mode,but receiving is off. EN low level (0~1.0V) : Receiving status, but transmitting is off (power amplifier static current is less than 0.17A with low-noise amplifier )
Working temperature: -25~+85℃
Temperature protection: If the module temperature reaches 105 ± 5 degrees, the transmission will be automatically shut down and only reception will be enabled.
Supply voltage: 12V(10 - 16V ), the higher the voltage, the higher the output performance)
Working current: 1.25~2.1A *2 @ 2W *2
Volume: size with housing 40*55*12mm
Weight: 54g(with housing), 10g (bare board)

Product Tags:

2x2W dual channel RF power amplifier

MIMO linear RF amplifier 1420-1530MHz

digital RF power amplifier with warranty

TDD 2*2W Dual Channel Digital Linear RF Power Amplifier 1420～1530M MIMO PA

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Hincn Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!