HF301 Electric Energy Meter Photoelectric Sampler

HF301 Electric Energy Meter Photoelectric Sampler

Main Features:

• Compact size, stable and reliable operation, suitable for use with electric energy meter calibration devices.

• Uses imported receiver components with strong anti-interference capability.

• High sampling/reception frequency up to 200 Hz, fully meeting the requirements of various meters.

Operating Instructions:

• When collecting signals from a mechanical electric energy meter, turn on the red switch on the controller and align the sampler with the surface of the mechanical meter so that the light beam points at the meter’s rotating disc.

• Connect the power. The green LED will stay on. Adjust the potentiometer until the red LED for pulse output lights up; then turn the potentiometer in the opposite direction until, when there is no black mark on the meter’s disc, the red signal LED just turns off. When the black mark arrives, the signal indicator LED should light up (indicating signal output). At this point, the adjustment is complete.

• When receiving the LED pulse signal indicator from an electronic energy meter, press the red button on the controller to turn off the LED of the emitting sampling component. Align the center receiving tube with the meter’s LED pulse signal indicator. (Follow the same steps as in item 2 thereafter.)

Technical Specifications:

• Operating voltage: DC 4.5–6 V

• Operating current: ≤ 50 mA (the following parameters are measured at a 5 V supply)

• Power consumption: ≤ 0.35 W (no load)

• Sampling distance: 1.0–2.0 mm

• Output signal: High level ≥ 4.5 V (no black mark), Low level ≤ 0.2 V (with black mark)

• Output current: 3–5 mA

• Anti-interference: Debounce tolerance ≤ 2.0 mm

• Sampling frequency: 200 Hz

Guangzhou GENY Electric Co. Ltd. is a leading manufacturer of energy meter test systems, whose predecessor is Guangzhou Yangcheng Science & Technology Enterprises Co., Ltd. which was established in 1987. We have been dedicated to the energy meter testing industry for over 30 years, and continuously invest in R&D to improve our technology and the quality of our products. It enables GENY to provide top quality products and prompt after-sales service to customers at home and abroad.

GENY's product lines include stationary energy meter test system and portable meter test equipment, which fully comply with the national and international standards of GB, IEC, CE, ISO, etc. Thanks to excellent parameters and high functionality, more than eight thousand sets of test benches and more than one million sets of portable standards have so far found applications in China and overseas markets, and received excellent evaluation and reputation.

We are a privately owned high-tech company with an import and export license. Over the past ten years, we have made great efforts to develop overseas markets and have achieved excellent results. Our products have been shipped to more than 40 countries and regions, serving not only industrial customers, power companies, but also national laboratories.

EPRI Guangdong China High Precision Meter Test System 

Design for testing high class RSM and Portable test equipments

Providing local technical support and after-sales service to global customers is our priority, and GENY focuses on supplying the right quality products and being a reliable partner in the past and in the future. We welcome our esteemed customers worldwide to cooperate with us.

(Guangzhou GENY ELECTRIC and Rigil-Geny Complete Test Bench Installation in Morocco)

Our customers

Our customers are located nationwide and worldwide:

1.More than electricity science research institutes over provincial level including China including National Electricity Science Research Institutes, North China Electricity Science Research Institutes, and East China Electricity Science Research Institutes (National Metrology Metrology Institute/Laboratory);

2.More than 210 power supply bureaus above the county level, including Shanghai Electricity Bureau, Beijing Electricity Bureau, Chongqing Electricity Supply Bureau;

3.More than 200 electric energy meter manufacturers including Hangzhou Holley Co., Ltd. and Ningbo Sanxing Co., Ltd.

4.In the international market, many large-scale energy meter manufacturers and power choose our products to replace ZREA or MTE products, such as Itron, Landis+gyr, EDMI, Secure Meters, BENTEC India Limited, Crystal Power Sinhal Udyog, ZEN Meters, Gram Power, LAN Engineering, Modern Transformers, Email Metering, AMPY UK, ITI LIMITED, Smart Meters (ADANI), United Electrical Ltd, SANDS Chennai, ALPHION, Ceylon Electricity Board, BSES NABL LAB etc. & various other national & international power companies, labs & meter manufacturers.

Our company is dedicated to providing customers with quality products and services. The goal is to make customers' dreams come true. At the same time, we believe in bring you the great economic benefit and development. Please either take a look at our website for more detailed information, or contact us directly. We look forward to the opportunity to work with your company for mutual success.

(Landis & Gyr——Single Phese Meter System With 48 positions)

(EMDI——200A Test Bnech with 48 three - phase positions)

Our resources and advantages

1.We have been engaged in the field of electric energy meter measurement for 30 years as the technological leader and creator of new technology in the field of electric energy meter calibrator. We have an excellent R&D team that has been devoted to the technical development of electric energy meter test instruments for a long time,we can satisfy the various different requirements of all kinds of customers.

2. All of our employees have received specialized training and acquired good professional quality and skills. The company adopts ISO9001 management system, and we passed ISO9001-2000 certification in 2002, and all employees have received TQM training. GENY has now realized ISO9001 control of R&D production, marketing & sales and service to fully guarantee product quality.

3.We have a complete marketing network and offer a competitive price.

Our well-trained service team is able to provide maintenance, training, schematic design and software update services to each customer for the first time. Thus, GENY will be your reliable partner and we welcome our honorable customers worldwide to cooperate with us.