Four Color Printer Slotter Die Cutter auto folder gluer 700x1800

Four Color Printer Slotter Die Cutter auto folder gluer

Model 700x1800

A . Lead edge Feeder

Vacuum roll feeder with a lead edge

The feeding of warped board is aided by an automatic feeding system with a section force hold-down device and a lead edge vacuum roll system. For large boards, skip feeding.

automatically going back to the starting position.
Digital display and automatic side guide position control.
Front stop position is motorized and controlled by a push-bottom mechanism.
memory display, feeding roll nip control, and motorized control.
There are two options: constantly feeding and skip feeding.
dust remover to guarantee excellent printing quality.
Easy-to-use pneumatic unit locking system

B. Rotary Die Cutter with Motorized slotting system(servo control, with pre-creasing and creasing functioin)

1.
Die Cutting mold roll
Quality thick-walled seamless steel pipe production, anneal treatment after welding. Ensure that performance is stable.
Correct the motion balance to increase the stability of high-speed operation.
◆ The surface is precision grinded and plated with hard chrome.
◆ die fixed screw hole spacing, axial 50mm, radial 20 equal parts.
◆ The height of the pressure line is 22.6mm. The thickness of the wood template is 13mm.
◆ The tooling roller is fitted with an automatic cylinder lift function, and when the tooling part is not involved in the work, or the paper delivery action stops, the tooling roller automatically
Land to avoid wear and tear of the pads.
2. Anvil cover cylinder (Hot rolled annealing treatment)
Choose a good manufacturer of molded adhesive pads. Depending on the specific degree of wear, the various cushion positions can be conveniently switched. Reduce the cost of use. Made of high quality thick seamless steel pipe, annealed after welding. Ensure that performance is stable. Correct the motion balance to increase the stability of high-speed operation. The surface is precision grinded and plated with hard chrome.
When the host machine is running, the pad roller axial type reciprocating free swimming 50mm, improve the service life of die-cutting pad. Set up a cushion repair mechanism to reduce the cost of use.
The pads roller cut to smooth the structure, repair the pads surface in time, and keep the pads roller flat. Difference compensation agencies. After the cushion repair, according to the cushion polishing size, actively track the engine speed to ensure that the moulding accuracy is always the same to you. Pad thickness 8 mm, width 250 mm. Electric adjustment and tool die roller clearance, adjustment range 0-16mm.
3.Die cutting cylinder
The knife mold roller is made of high-quality steel, with surface grinding and hard chrome plating.
Dynamic balance correction, increase the stability of operation. The distance between the screw holes of the knife mold is 100 mm in the horizontal direction and 12 equal parts in the radial direction, and the screw hole is M10.Applicable pressure line height is 22.60mm.
The thickness of the wooden template is 13mm, and the height of the blade is 25.4mm. The width of the Yuli knife is 7mm, and the imported Yuli knife is used, which ensures both strength and toughness.
The box height is manually adjusted by synchronizing four knives.
4.Phase adjustment
Electric planetary gear structure. Brake motor equipped with high-precision encoder. Phase electric or digital control 360° forward and reverse adjustment, can be adjusted when the main machine is running or parking.
Variable frequency control phase adjustment speed. Fast phase adjustment and zeroing, high accuracy.
The axial adjustment of the knife mold roller adopts electric or digital adjustment, with a control range of ± 5mm.
Automatic zeroing function, convenient fixed template, reduce paper waste, simplify operation.
5.Paperboard guiding rolls
The gap of the paper guide roller is adjusted electrically, with a range of 0-12mm.The power transmission of the paper guide roller adopts a rolling cross shaft coupling, which reduces wear and makes the transmission smoother.
6. Independent servo driving can avoid print overlapped shadow.

In Line Folder Gluer Counter Ejector ( 9 Servo motor control, spray gluing system)
Automatic gluing unit

1.The gluing machine adopts high quality steel welding carefully processed and
assembled
2.The gluing machine is used by linkage of the die cutting unit or slotting unit of printing
machine, the electrical control system is communication with printing machine. When the
printing machine is running, the gluing machine also running as they are one system.
3.Automatically provide the glue, circulation glue, never break glue, no work to add
glue, save time and effort.
4. Folding section is equipped with adjustable line pressing wheels to make folding cartons more smoothly and glue
more beautifully and accurately.
5.Counter unit, stack the carton and make correction, put out safely and smoothly, accurately, without error,
digital control, simple operation, input without stopping machine. 9 Servo motors control can guarantee best harmony of working actions.

Guangzhou HS Machinery Co., Ltd. is a company combined with R and D, production and marketing, having imported international technology, having experienced and perfect technical and service team and having exported our products to more than 80 countries. Our main products: printer slotter rotary die cutter vibration stripper auto stacker, auto folder Gluer, auto stitcher Gluer, semi auto Gluer. Our concept: satisfactory after-sales services are the start before sales. Your trust is our responsibility!