7079964080 7079823880 707-99-64080 707-98-23880 Arm Boom Bucket
Hydraulic Cylinder Excavator Seal kit
For maintenance crews and fleet supervisors tasked with preserving
the operational reliability of EXCAVATOR loaders in mining, heavy construction, and demolition projects—where Arm
Boom Bucket Hydraulic Cylinder systems tackle high-load,
high-impact tasks such as lifting 8–15 ton rock piles (boom
elevation), digging through compacted soil (bucket penetration),
and maneuvering debris in rough terrain (arm extension)—the
durability of the hydraulic seal system is indispensable. Unlike
lift-tilt-steering systems that prioritize precision, Arm Boom
Bucket systems demand robust impact resistance: a boom cylinder supporting heavy loads must avoid sudden
collapse, a bucket cylinder digging into hard ground needs to
withstand abrasion, and an arm cylinder adjusting position must
maintain stability under variable stress. Each day, these systems
operate in harsh environments: they endure continuous heavy-load
cycles (30+ daily boom/bucket/arm movements), exposure to coarse
debris (2–10 mm rock fragments, construction rubble), and extreme
hydraulic pressure spikes (3,500–5,000 psi during digging). All
these conditions depend on the leak-proof and wear-resistant
performance of the Arm Boom Bucket Hydraulic Cylinder. If seals
fail, the EXCAVATOR loader loses control of boom height (e.g.,
dropping heavy materials), bucket digging force (e.g., inability to
break soil), or arm maneuverability (e.g., stuck
positioning)—resulting in project delays, equipment damage, and
expensive cylinder bore scoring (from unprotected contact with
coarse debris). To prevent such issues, the Arm Boom Bucket Hydraulic Cylinder Excavator Seal kit (part numbers 7079964080, 7079823880, 707-99-64080, 707-98-23880) is the essential solution. It creates a specialized,
impact-optimized seal that adapts to the high-stress movements of
arm, boom, and bucket, ensuring consistent hydraulic pressure for
strong lifting, efficient digging, and stable positioning—while
resisting the heavy wear, coarse debris, and pressure spikes unique
to these operations.
Accurate part numbers are critical to guarantee compatibility with
the Arm Boom Bucket cylinders of EXCAVATOR loaders, as these
systems have distinct structural and functional needs (e.g., boom
cylinders require high-pressure seals, while bucket cylinders need
abrasion-resistant designs). The 7079964080 (written with hyphens as 707-99-64080) and 7079823880 (written with hyphens as 707-98-23880) serve as reliable references for technicians and procurement
teams. They confirm that the seal kit meets the exact rod diameter
(60–180mm), pressure range (3,500–5,000 psi), and abrasion
resistance rating (<0.02 mm/100 hours) of Arm Boom Bucket
cylinders—not generic hydraulic components. Notably, 707-99-64080 and 707-98-23880 are integrated into global parts management systems (e.g.,
Caterpillar, Komatsu inventory databases), which is crucial to
avoiding ordering mistakes. If an incorrect seal kit (e.g., one
designed for lift cylinders) is used on a bucket cylinder, it will
suffer severe abrasion within 60 hours of use, leading to oil leaks
and requiring 3–4 days of downtime for replacement—costing 9,500 in lost productivity. For instance, a construction company in
Canada using a Caterpillar 336 excavator loader discovered that
installing a generic lift seal (instead of 7079964080) on the boom cylinder caused pressure failure during rock
lifting—dropping a 12-ton boulder and resulting in $25,000 in
equipment damage. In real-world procurement situations—whether searching on
industrial platforms (e.g., MSC Industrial Supply, RS Components),
checking regional distributor inventory, or negotiating with mining
equipment vendors—part numbers like 7079964080 and 7079823880 may appear in both hyphenated (707-99-64080, 707-98-23880) and non-hyphenated formats. This flexibility is designed to align
with different inventory protocols: small construction firms may
list 707-98-23880 for urgent emergency orders, while large mining operations use 7079823880 for bulk shipments to multiple job sites. Importantly, these part
numbers exclusively identify the Arm Boom Bucket seal kit and are never used for lift-tilt-steering or auger
systems, ensuring technicians receive the correct product. A mining
company in Australia searching for "boom seals for Komatsu PC400
loader" will find that 7079964080 (or 707-99-64080) directly matches their model, confirming compatibility with the
loader’s 5,000 psi boom pressure and 15-ton lifting capacity.
Regardless of format, 7079964080 and 7079823880 guarantee the seal kit is engineered for Arm Boom Bucket demands:
it maintains pressure stability within ±8 psi during boom cycles,
reduces abrasion-related wear to <0.01 mm/100 hours, and ensures
bucket digging force with an impact resistance rating of >800
N—even when exposed to 2–10 mm debris.
For maintenance professionals servicing Arm Boom Bucket systems of
EXCAVATOR loaders, verifying the part numbers—7079964080, 7079823880, 707-99-64080, 707-98-23880—is a mandatory step. Using wrong seals (e.g., those for light-duty
warehouse loaders) leads to catastrophic failures: a boom seal
unable to handle high pressure will cause sudden collapse, leading
to safety hazards; a bucket seal with poor abrasion resistance will
wear out quickly, causing oil leaks; an arm seal with weak impact
resistance will crack under stress, halting operations. The 707-99-64080 and 707-98-23880 seal kits solve these problems with their Arm Boom Bucket-specific
design: each seal features a five-layer heavy-duty performance system (an outer abrasion-resistant ceramic coating to block 2–10 mm
debris, a middle high-tensile steel reinforcement layer to handle
impact, a pressure-resistant core to manage boom/bucket spikes, an
inner oil-retention rubber layer to prevent leaks, and a
corrosion-resistant underlayer to protect against moisture). The
seals are made of a polyurethane-nylon composite that works with
both heavy-duty mineral hydraulic oils and high-temperature
synthetic fluids (e.g., Shell Tellus S4 VX) used in
mining/construction EXCAVATOR loaders. Unlike generic seals that
wear out after 200 hours in mining operations, the 7079964080 and 7079823880 seals last over 1,500 hours—reducing maintenance frequency by 87%.
Familiarity with these part numbers also speeds up emergency
repairs: a mining site in South Africa with a broken bucket
cylinder ordered 707-98-23880 from a regional supplier and resumed rock digging within 18 hours,
instead of waiting 96 hours for generic parts.
The Arm Boom Bucket Hydraulic Cylinder Excavator Seal kit (7079964080, 7079823880, 707-99-64080, 707-98-23880) is engineered to excel in the unique high-stress conditions of
Arm Boom Bucket operations. These include continuous heavy-load
cycles (e.g., 40+ daily boom/bucket/arm movements) that degrade
generic seals; coarse debris infiltration (2–10 mm particles) that
damages seal surfaces; and extreme pressure spikes (3,500–5,000
psi) that cause seal failure. To address these, the seals in the
kit have a debris-resistant polyurethane-nylon surface (to repel
coarse fragments), a pressure-relief valve (to mitigate spikes),
and a shock-absorbing elastic core (to handle impact). In
accelerated performance tests, 7079964080 seals showed no oil leaks after 8,000 boom cycles and 1,000 hours
of debris exposure—far outperforming generic kits that failed after
600 cycles. By choosing seal kits marked with 707-99-64080 or 707-98-23880, operators reduce Arm Boom Bucket system inspection time by 75%,
cut unexpected downtime by 92%, and extend hydraulic cylinder
service life by 4–6 years.
1R0739 1R0762
