0.5 Inch OLED Display Module 88x48 Pixels Passive Matrix With I2C
Interface
Product Overview
Ultra-small monochrome self-luminous OLED display module featuring
passive matrix driving and COG packaging technology with CH1115
driver IC and I2C interface.
| Product | 0.5 Inch OLED Display Module |
| Number Of Pixels | 48x88 Pixels |
| Driver IC | CH1115 Or Equivalent |
| Display Mode | Passive Matrix |
| Display Color | Monochrome (white) |
| Drive Duty | 1/48 Duty |
| Panel Size | 8.928 X 17.1 X 1.227 (mm) |
| Active Area | 6.124 X 11.244 (mm) |
| Pixel Pitch | 0.128 X 0.128 (mm) |
| Pixel Size | 0.108 X 0.108 (mm) |
| Viewing Direction | All Viewing Angles |
| Interface | I2C |
| Connection | Soldering/Hotbar (customizable) |
| Pin Number | 14 Pins (Can Be Customized) |
| Life Time | 50,000 Hours @60cd/m2 |
Technical Features
- OLED self-luminous technology requires no backlight
- High contrast ratio up to 10000:1 with full-view clarity
- Extremely low power consumption ideal for battery-powered devices
- Ultra-thin and lightweight structure for embedding in narrow spaces
- Wide operating temperature range (-40°C to +70°C) for harsh
environments
- Simple I2C two-wire interface for easy connection and programming
Core Applications
- Wearable & Portable Electronics: Bluetooth earphones, smart wristbands, health monitors, MP3
players, voice recorders, electronic cigarettes, miniature remote
controls
- Medical Health Devices: Blood glucose testers, oximeters, portable blood pressure
monitors, small diagnostic equipment
- Industrial Control & IoT: Sensor nodes, smart home controllers, security detectors,
instrument parameter displays
- Automotive & Travel: Tire pressure monitors, vehicle status indicators, bicycle
odometers
Frequently Asked Questions
I want the LCD display 8 digits and the outline size is
65x30x2.8mm?
No problem. Please send us your specification/drawing paper. If you
don't have specifications, you can provide samples; we will
recommend suitable standard products or customize based on your
requirements.
This LCD is just what we want, but it is big size, do you have any
smaller size? And the display content need to be changed a little.
For segment type LCD modules, if you need to modify outline size or
display content, a new LCD glass module is required. We will create
new tooling for you.
This LCD display is HTN type, but I want STN type, can you make?
That's all right. We can change the display type as per your
request.
I want to customize a new LCD module. Can you do?
Yes, we can. Please send your drawing paper. If you don't have one,
please provide the outline size, display information (glass
thickness, polarizer, display type, connector mode, storage temp,
operating temp, supply voltage, viewing direction, drive
condition), and we can customize for you.
What is leading time for tooling?
Generally, it takes 15 to 25 days after drawing paper confirmation
and tooling charge payment. We will report the exact time when you
confirm the drawing paper.
Can you send us samples for checking?
Yes. Sample orders are available.
What is the Leading Time?
If we have stock for standard products, the lead time is one day
after payment. For mass production of special orders, the lead time
is about 15-30 days. If we can finish earlier, we will report the
information in advance.
High Contrast 1.3 Inch OLED Display with 128x64 Dots Resolution and 160° Viewing Angle SH1106 Drive IC 30PIN Soldering FPC
