| Absolute Maximum Ratings (TA=25 unless otherwise specified) |
| Collector-Emitter Voltage | VCE | | | | 40 | V |
| COM Terminal Voltage | VCOM | | | | 40 | V |
| Input Voltage | VI | | | | 30 | V |
| Single Channel Peak Collector Current | ICP | | | | 500 | mA |
| Output Clamp Diode Peak Forward Current | IOK | | | | 500 | mA |
| Total Emitter Peak Current | IET | | | | -2.5 | A |
| Package Thermal Resistance | JA | SOP16 | | 63 | | /W |
| Package Thermal Resistance | JA | DIP16 | | 50 | | /W |
| Maximum Operating Junction Temperature | TJ | | | | 150 | |
| Soldering Temperature (10s) | TW | | | | 260 | |
| Storage Temperature Range | TS | | -65 | | +150 | |
| Recommended Operating Conditions (TA=25 unless otherwise specified) |
| Collector-Emitter Voltage | VCE | | 0 | | 40 | V |
| Output Current | IOUT | Continuous output, TA=+85, TJ=120 | | | 100 | mA/ch |
| Input Voltage | VIN | | 0 | | 24 | V |
| Input Voltage (Output ON) | VIN(ON) | IOUT=400mA | 2.8 | | 24 | V |
| Input Voltage (Output OFF) | VIN(OFF) | | 0 | | 0.7 | V |
| Clamp Diode Reverse Voltage | VR | | | | 40 | V |
| Clamp Diode Peak Forward Current | IF | | | | 350 | mA |
| Operating Temperature Range | TA | | -20 | | +85 | |
| Operating Junction Temperature | TJ | | -20 | | +125 | |
| Power Dissipation | PD | SOP16, TA=+25 | | | 1.25 | W |
| Power Dissipation | PD | SOP16, TA=+85 | | | 0.65 | W |
| Power Dissipation | PD | DIP16, TA=+25 | | | 1.47 | W |
| Power Dissipation | PD | DIP16, TA=+85 | | | 0.76 | W |
| Electrical Characteristics (TA=25 unless otherwise specified) |
| Turn-on Input Voltage | VIN(ON) | VCE=2V, IC=200mA | | 1.9 | 2.4 | V |
| Turn-on Input Voltage | VIN(ON) | VCE=2V, IC=250mA | | 2 | 2.7 | V |
| Turn-on Input Voltage | VIN(ON) | VCE=2V, IC=300mA | | 2.1 | 3 | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=30mA | | 0.8 | 1 | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=60mA | | 0.9 | 1.1 | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=120mA | | 1.0 | 1.2 | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=240mA | | 1.1 | 1.4 | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=350mA | | 1.3 | 1.6 | V |
| Input Current | II | IC=60mA, VI=12V | | 4 | 5.3 | mA |
| Input Current | II | IC=60mA, VI=6V | | 1.7 | 2.2 | mA |
| Input Current | II | IC=60mA, VI=4.5V | | 1.1 | 1.6 | mA |
| Input Current | II | IC=60mA, VI=2.4V | | 0.35 | 0.7 | mA |
| Clamp Diode Forward Voltage | VF | IF=350mA | | 1.6 | 2 | V |
| Collector Cut-off Leakage Current | ICEX | VCE=40V, II=0 | | - | 50 | uA |
| Collector Breakdown Voltage | VCE | VCE=40V, II=0 | 40 | | | V |
| Clamp Diode Reverse Leakage Current | IR | VR=40V | | - | 50 | uA |
| Clamp Diode Reverse Breakdown Voltage | VR | VR=40V | 40 | | | V |
| Propagation Delay Low-to-High | tPLH | VL=12V, RL=45 | | 0.15 | 1 | us |
| Propagation Delay High-to-Low | tPHL | VL=12V, RL=45 | | 0.15 | 1 | us |