Hot Rolled and Forged 30CrNiMo8 Alloy Steel Round Bar in 6m Length Q+T Solid Solution

Hot Rolled and Forged 30CrNiMo8 Alloy Steel Round Bar in 6m Length Q+T Solid Solution

Products Specification

• High Tensile & Yield Strength: After Q+T treatment, 30CrNiMo8 typically achieves yield strengths of ≥900 MPa and tensile strengths up to 1100–1200 MPa, making it ideal for high-load components.
• Excellent Toughness & Impact Resistance: Even at sub-zero temperatures, this steel maintains ductility and resists brittle fracture—critical for safety-critical parts.
• Superior Hardenability: The synergistic effect of Cr, Ni, and Mo ensures deep and uniform hardening during quenching, minimizing distortion and cracking risks.
• Good Machinability in Annealed State: While supplied in Q+T condition for end-use performance, the steel can be pre-machined in softer states if required.
• Enhanced Fatigue & Wear Resistance: Perfect for shafts, gears, crankshafts, connecting rods, and other cyclically loaded components.
• Controlled Grain Structure: Hot rolling followed by forging refines the grain flow, improving mechanical integrity and reducing internal defects.
• Standard 6m Length: Optimized for transport efficiency and machining yield, minimizing waste during fabrication.

1. Electric Arc Furnace (EAF) Melting: High-purity raw materials melted under controlled atmosphere.
2. Ladle Refining & Vacuum Degassing: Ensures ultra-low levels of gases (H₂, O₂, N₂) and inclusions for superior cleanliness.
3. Continuous Casting or Ingot Casting: Followed by homogenization annealing to eliminate segregation.
4. Hot Rolling: Performed at precise temperatures to achieve fine-grained austenite structure.
5. Open-Die or Closed-Die Forging (Optional): For critical applications requiring directional grain flow and enhanced density.
6. Quenching & Tempering (Q+T):
   • Quenching: Rapid cooling in polymer or oil medium after austenitizing (～850–880°C).
   • Tempering: Reheated to 550–650°C to relieve stresses and develop tempered martensite microstructure.
7. Straightening, Grinding (Optional), and Ultrasonic Testing: Ensures straightness tolerance (<1.5 mm/m) and internal soundness.
8. Final Inspection & Certification: Dimensional checks, hardness verification, and chemical/mechanical testing per EN 10204.

• Diameter Range: 20 mm to 300 mm (custom sizes available)
• Standard Length: 6 meters (cut-to-length options: 3m, 4m, 6m, or customer-specific)
• Tolerance (ISO h11/h12): ±0.5% to ±1.0% of nominal diameter
• Surface Finish: Black hot-rolled scale (as-rolled) or peeled/ground upon request
• Straightness: ≤ 1.5 mm per meter

• Heavy Machinery: Axles, spindles, hydraulic rods, and transmission shafts
• Automotive & Trucking: Crankshafts, camshafts, differential gears, and steering knuckles
• Oil & Gas: Drill collars, downhole tools, and high-pressure valve stems
• Defense & Aerospace: Landing gear components, torsion bars, and armored vehicle parts
• Power Generation: Turbine shafts, generator rotors, and coupling hubs
• Industrial Equipment: High-stress fasteners, forging dies, and extrusion screws

• Germany: 30CrNiMo8 (DIN 1.6580)
• Europe: 30NiCrMo8 (EN 10083-3)
• USA: AISI 4340 (approximate; note: 30CrNiMo8 has higher Ni content)
• China: 30Cr2Ni2Mo (GB/T 3077)
• France: 30NCD11
• Japan: Not directly equivalent; closest is SNCM439

• Mill Test Certificate (EN 10204 3.1 or 3.2)
• Chemical analysis report
• Mechanical test results (tensile, impact, hardness)
• Heat treatment parameters log
• Optional: Ultrasonic testing (UT) per EN 10228-3, magnetic particle inspection (MPI)

• Bars are bundled with steel straps, protected with anti-rust oil and plastic end caps
• Seaworthy packaging for export (fumigated wooden pallets or steel cradles)
• Standard delivery time: 7–25 days depending on size and quantity
• Global shipping via sea, air, or land freight

Our company is located in Wuxi City, China, we are a stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe and other products distribution wholesale private enterprise. Our company operates stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe best-selling consumer market. Without our products among consumers enjoy a higher status, the company with a number of retailers and agents to establish a long-term stable cooperative relationship. Our distribution of stainless steel plate, seamless steel pipe, round steel, steel belt, decorative pipe variety complete, reasonable price. The strength of the company, heavy credit, abide by the contract, ensure product quality, with a variety of management characteristics and the principle of small profits, to win the trust of our customers.