Type-C USB 5V 2A Boost Converter Step Up Power Module Lithium Battery Charging Protection Board

Type-C USB 5V 2A Boost Converter Step-Up Power Module Lithium Battery Charging Protection Board

Features:

power off operation is required to adjust the charging voltage setting; the usb-a base on the back of the module needs to be welded by the user, and we will provide a female base with the product.

Description:

As shown in the figure below, the voltage can be changed by adjusting the solder joint of the pad. Be sure to power off the operation!

Introduction:

1. When the load current is less than 50mA continuously, the output will be turned off.
2. It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
3. When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.
4. When the battery voltage drops below 4.1V, the charging cycle starts again.
5. When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
6. The usb-a base welding position is provided on the back of the product, which can be installed manually.
7. It supports discharging while charging.

Boost Efficiency(for reference):

Shenzhen Canyi Technology Co., Ltd. is committed to the promotion and distribution of well-known electronic components, and its products cover network communication, industrial control, automotive electronics, security monitoring and consumer electronics. In 2013, Canyi Technology officially represented Delcheng Technology (DEC) products, and in 2015 officially became the general agent of overseas sales. On this basis, after years of hard work, it has been officially represented and distributors of many electronic component manufacturers at home and abroad such as Changdian, Xinghai, Tuofeng, Leshan, Roma and Anshi. We have a strong sales and service team to provide customers with full-process technical services from selection to mass production, based on more than 1000 square meters of logistics and warehousing, through standardized logistics operation mode, advanced testing equipment, and strict products inspection. Providing customers with flexible, safe and efficient logistics services.