3A 5A 8A DC-DC 500KHz Step Down Power Module 5V-12V

3A 5A 8A DC-DC Buck Step-down Power Supply Module 5V-12V 24V to 5V 3.3V 9V 12V high output

Type:MINI560 step-down power module

Type: MINI 360 step-down power module
Size: approx.17 X 11 x 3.8mm
Input voltage: 4.75V- -23V
Output voltage: 1.0V-17V
Current output: peak 3A, 1.8A long time
Transfer efficiency: 96% ( highest)
Swtiching frenquency: 340KHz
Output ripple: 30mV(no-load)
Load regulation:0.5%
Voltage regulation:2.5%
Operating temperature: -40-+85
Color: show as pictures
Non- isolated step- down
Synchronous rectification
Features: use of integrated forming power inductor and synchronous rectifier control chip.It's smaller and more efficient

Type:3A adjustable voltage regulator power supply module pressure drop plate

Input Voltage:4.5-28V

Output voltage:0.8-20V

Output current:3A(Max)

Efficiency:92%(Max)

Switch Frequency:1.5MHz(Max),1MHz(Typ)

Operating Temperature:-20 to 85℃

Size:22*17*4mm

Type:DC-dc 3A step-down power modele(3.3V/5V/9V/12V fixed input)

IN-:INPUT Negative electrode

IN+:INPUT Positive electrode

OUT+:OUTPUT Positive electrode

OUT-:OUTPUT Negative electrode

Note:

IN-:INPUT Negative electrode

IN+:INPUT Positive electrode

OUT+:OUTPUT Positive electrode

OUT-:OUTPUT Negative electrode

Type:MINI high power DC buck module

Type:Wide input voltage DC-DC buck module

Input voltage range: 6V- 36V

Output voltage: 3.3V/5V

Output current: 0- -2A

Voltage accuracy:1%

Output ripple noise: less than 30mV (0.5- -2A load)

Conversion efficiency: more than 85% (5V2A output)

Static current: less than 50ua

Shutdown current: less than 2ua

Working environment: 0° - 70.

Output short circuit protection

Over temperature protection of the whole machine

The EN pin voltage is higher than 1.5V to open the module output.EN pins grounded or suspended close the output and EN pins grounded or suspended close the output. Short EN pin to IN+ when module output is normally on;When the module switch needs to be controlled by SCM, connect EN pin to I0 pin of SCM, and IO pin is set as push- pull output.

Type:Mini DC-DC buck module

Input voltage: 4.5V-16V

Output voltage: 3.3V I 5.2V

Buck efficiency: up to 98%

Output current: 0~4A

Voltage accuracy: < 1%

L oad regulation: <0.5%

Output ripple noise: < :20mV

Static power consumption: <500uA

Working environment:- -40° ~ 85.

Size: 13* 18.6 * 5mm

Preset two kinds of voltage, the default output 5.2V (to the mobile phone and other electronic products can make up the line loss when charging to achieve greater charge current), the use of electric iron disconnect the connection can be adjusted to 3.3V output voltage. Leads to the EN control pin the default high-level output, no output when the low level.Leads to FB feet, with professional knowledge of the user Can be an external resistor to change the output voltage.

Type:Mini step-down power module,non-isolated step- -down module (BUCK)

synchronous rectifier

Input voltage: DC 4.5- -24V

Output voltage: integrated adjustable and fixed output, the back can choose a fixed output voltage

Adjustable range (0.8- -17V), fixed voltage (1.8V 2.5V 3.3V 5V 9V 12V)

Output Current: 3A (Please note that full cooling), the actualtest input 12V 1.5A output less heat without special treatment.

Conversion efficiency: up to 97.5% (6.5 turn 5V 0.7A)

Operating temperature:

Industrial grade (- -40 C to + 85 C ) (the higher the temperature, the smaller the output power)

Output Overvoltage Protection: None

Full load temperature rise: 40C

Static current: 0.85mA

Load regulation:1%

Voltage regulation:0.5%

Dynamic response speed: 5% 200uS

Output short circuit protection:Do not short- circuit a long time

Input reverse polarity protection:None, input reverse polarity protection diode

Enable control:Yes, high work, low stop working, high level 2- -5V, a low level of about OV. The default input with internal pull-up to the positive electrode.

Connection: Welding

Input: Welding

Output: welding / pin

Welding hole spacing: 2.54 mm

Shenzhen Canyi Technology Co., Ltd. is committed to the promotion and distribution of well-known electronic components, and its products cover network communication, industrial control, automotive electronics, security monitoring and consumer electronics. In 2013, Canyi Technology officially represented Delcheng Technology (DEC) products, and in 2015 officially became the general agent of overseas sales. On this basis, after years of hard work, it has been officially represented and distributors of many electronic component manufacturers at home and abroad such as Changdian, Xinghai, Tuofeng, Leshan, Roma and Anshi. We have a strong sales and service team to provide customers with full-process technical services from selection to mass production, based on more than 1000 square meters of logistics and warehousing, through standardized logistics operation mode, advanced testing equipment, and strict products inspection. Providing customers with flexible, safe and efficient logistics services.