AIRERA 15kW Air-Cooling Oil-Injected Screw Compressor
The AIRERA 15kW series is engineered for industrial excellence,
balancing robust power with intelligent efficiency. Designed to
withstand 24/7 heavy-duty cycles, this compressor is the heart of
your production line, delivering stable, high-quality compressed
air with minimal maintenance.
Key System Advantages
Drives and Electrics
The almost loss-free power transmission guarantees reliable,
high-performance compressor operation. The regular maintenance
requirement is reduced to lubrication of the motor. All electronic
components are brand products from leading manufacturers.

Oil Separation System
Compressors up to 132 kW are equipped with external separators that
can be changed in a simple spin-off/spin-on process. Larger units
have an internal separator cartridge. Due to the excellent
separation efficiency of the system as a whole, the compressors can
be used in the pressure range of 5.0 to 15.0 bar. Special pressures
available on request.

Oil Circuit
The amount of oil in the units is determined to extend oil change
intervals (depending on ambient conditions). An oil level sensor is
integrated as standard and is read by the controller. All units in
this series have a horizontal oil separation vessel where oil is
separated from compressed air highly efficiently at low speeds.

Technical Specifications - 15kW Air Cooling Compressor
| ITEM | UNIT | MODEL AGCD-15 |
|---|
| Free air delivery | m³/min | 2.35~1.65 |
| Max. working pressure | MPa | 0.7~1.3 |
| Compressor type |
| Oil inject screw compressor |
| Cooling type |
| Air cooling |
| Driven type |
| Direct driven |
| Inlet status - Temperature | ℃ | ≤45 |
| Inlet status - Pressure | MPa | Atmospheric pressure |
| Inlet status - Relative humidity |
| ≤90% |
| Noise Level | dB(A) | ≤70 |
| Residual oil content | ppm | ≤2 |
| Drive rotor speed | rpm | 2930 |
| Compressed air outlet temperature | ℃ | Ambient temperature+10 |
| Cooling air flow | m³/hr | 6300 |
| Control mode |
| Intelligent controller |
| Safety valve set pressure | MPa | 0.77 ~ 1.43 |
| Lubricating oil volume | L | 10 |
| Compressed air outlet connection |
| G1 |
| Dimension - L | mm | 1080 |
| Dimension - W | mm | 750 |
| Dimension - H | mm | 1150 |
| Net Weight | kg | 350 |
| Motor - Model |
| Y2160M2-2 |
| Motor - Speed | rpm | 2930 |
| Motor - Rated Power | KW | 15 |
| Motor - Service factor |
| 1.2 |
| Motor - Protection type |
| IP55 |
| Motor - Efficiency |
| IE3 |
| Motor - Startup mode |
| Y-Δ starting |
| Motor - Voltage | V | 380 (Special on request) |
| Motor - Frequency | Hz | 50 (Special on request) |
| Motor - Rated current | A | 29.4 |
| Motor - Weight of motor | kg | 125 |

Frequently Asked Questions
Why should I choose a 15kW screw compressor over a piston
compressor?
Compared to traditional piston compressors, the AIRERA 15kW screw
model offers significant advantages:
Continuous Operation: Supports 100% duty cycle for non-stop performance without
overheating.
High-Quality Air: Precision oil-injection combined with multi-stage separation
ensures extremely low oil carryover.
Low Noise: The fully enclosed cabinet design keeps noise levels far below
those of piston units, allowing for installation directly on the
shop floor.
Is the daily maintenance of this machine complicated?
It is designed for simplicity. We utilize a modular and spin-on
design:
The air filter, oil filter, and oil-gas separator can be easily
replaced just like a car's oil filter.
The wide-opening side doors provide clear internal access, allowing
even non-professional staff to complete basic maintenance in
minutes.
What safety protection features does the smart controller include?
The AIRERA PLC intelligent control system provides comprehensive
protection, including:
Over-temperature/Over-pressure Protection: Automatic alarm and shutdown during abnormalities.
Motor Overload Protection: Prevents motor damage caused by unstable currents.
Phase Reverse/Phase Loss Protection: Ensures the unit won't run in reverse if wired incorrectly.