VMC-1275HL VMC Vertical Machining Center Y axis Lightening

Standard Configuration:

Mechanical manual tool magazine,rear-flush chip removal,spindle oil cooler,water gun,air gun,spindle air curtain,spindle ring spray,centralized lubrication,air source treatment,oil-water separation,heat exchanger,nitrogen balance

Optional Configuration:

Mitsubishi/Syntec system,hollow screw,chain-type chip removal,grease lubrication,electrical cabinet air conditioner,4-axis,5-axis,column heightening,tool internal cooling,fixtures,clamps

※ The product’s appearance and configuration will be updated with technological development (but will not be lower than current technical requirements). No separate notification will be given; specific details shall be subject to the technical agreement at the time of purchase.

Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.

Note ②: This model is designed for export (considering container height), so the standard Z-axis travel is 600mm; domestic customers can opt for the model with 700mm Z-axis travel.

Note ③: Optional BT50-155 spindle.

Note ④: In case of stock shortage, equivalent specifications (e.g., HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.

Note ⑤: Optional 30-tool capacity for the tool magazine.

Note ④:This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.