Steel Pipe External Surface Steel Rebar Automatic Shot Blasting Machine With Special Rollers

The steel pipe shot blasting machine is a blasting machine with special roller conveyor, designed for removing scale, paint and rust from carbon steel pipes. Another application is to blast cleaning LPG cylinders, gag cylinders or cylindrical workpieces which can easily pass through the blasting chamber on a V shape roller conveyor.

Steel pipe blasting machine has external wall blasting machine and internal wall blasting machine. The internal wall blasting machine can blast clean pipe with diameter from 50mm to 300mm by using air blasting. If the steel pipe diameter is from 300-700mm, it can use air blasting method or shot blasting method. If the diameter is above 700mm, it should use automatic shot blasting machine to do this job.

Blasting wheels are made from wear-resistant materials with power from 5.5 to 30 kW, providing efficient shot blasting. Blasting speed can be from 0.5m/min to 2m/min.

High quality cartridge type dust collector is used to keep the environmental protection, which makes sure the dust emission lower than 30mg/m3.

If a standard model does not meet your surface preparation requirement, we will develop a tailor-made blast machine design for you.

1. The roller conveyor shot blasting machine is compact design and the machine can have pit or without pit.
2. Fully tailor made blasting machine according to workpiece shape and productivity requirement.
3. Roller conveyor speed adjustable from 0.5m/min to 4m/min.
4. Touch screen operator interface and integrated PLC, automatic mode or manual mode;
5. The blasting chamber is protected by wear-resistant manganese steel liner, lifetime is about 15000 hours.
6. Series of rubber screens keep the abrasive inside the blasting machine in entry chamber and exit cleaning chamber.