220V 50Hz Ф0.9mm Needle Flame Test Chamber With 45 Degree Angel
|
220V 50Hz Ф0.9mm Needle Flame Test Chamber With 45 Degree Angel IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas......
Dongguan Kingpo Technology Limited
|
IEC 60695-11-5 Flammability Test Equipment Needle Flame Test Chamber
|
... 4.15.1, IEC60335-1 clause 30.2.3.2, Annex E, clause 13.3, etc. Equipment Overview The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when...
Sinuo Testing Equipment Co. , Limited
|
0.5 Cube Stainless Steel Needle Flame Test Chamber Combustible Materials Flammability Testing Equipment
|
... result from fault conditions, in order to assess the fire hazard by a simulation technique. The results of this test may be used as elements of a fire hazard assessment which takes into account all of the factors which are pertinent to an assessment of...
Sinuo Testing Equipment Co. , Limited
|
Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber
|
Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the ......
SKYLINE INSTRUMENTS CO.,LTD
|
PLC Control Needle Flame Test Chamber 4mm Coper Block
|
Flame Test Chamber Needle-Flame Test Apparatus PLC Control 4mm Coper Block Standard: IEC 60695-11-5 Fire hazard testing – Part 11 -5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance. Application: The Needle-Flame Test Apparatus to simulate the effect of a small flame......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Needle Flame Testing Chamber omply with IEC60695-11-5 , IEC 60335-1
|
Features: 1.0 The machine comply with the standards of IEC60695-11-5, IEC 60335-1, IEC60598-1 and IEC60745 2.0 Needle burner: made of stainless steel bore 3.0 Including thermocouple and display to monitor the wire temperature 4.0 Input power: 220V/50Hz......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Plastic Burn Needle Flame Test Apparatus Electrical Industry , Chemistry Flame Test Chamber
|
... the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test time for the temperature of the standard copper block to increase from...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Laboratory Flammability Testing Equipment , IEC60695-11-5 Needle Flame Test Apparatus
|
Laboratory Testing Equipment IEC60695-11-5 Needle Flame Test Chamber Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment whe......
Guangzhou HongCe Equipment Co., Ltd.
|
Flame Chamber Needle flame testing machine
|
Needle Flame Test Apparatus Model: GC-ZY-A A. Product Introduction The needle flame test machine is suitable for simulating small flames generated inside the product under fault conditions in electronic and electrical products, and uses simulation ......
Guangdong Guangce Instrument Technology Co., Ltd
|
45 Degree Tilted Needle Flame Test Apparatus Fire Hazard Protection Testing Equipment IEC60695
|
.... The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. Needle flame tester is...
Pego Electronics (Yi Chun) Company Limited
|
