High Thermal Conductivity CNAS 5.0mm Copper Clad Laminate Sheet
|
... performance in strength, weldability and heat conduction. ZEGOTA high-quality copper clad stainless steel adopts innovative technology, high-end equipment and high-quality raw materials. And it has advanced high ductility, ......
ZEGOTA Precision Technology Co.,LTD
|
0.3mm 0.5mm 99.9% Copper Clad Laminated Sheet For Decoration
|
... can form a green film, or patina, on its surface over time. However, this patina will not flake the way rust does. Instead, it creates an even, thick coating on top of the copper itself. The thickness of sheet and strip copper is measured by its weight in...
Jiangsu Yutai Iron And Steel (Group) Co., Ltd.
|
Glass Epoxy FR4 PCB Printed Circuit Board Copper Clad Laminate Sheet Bare PCB Boards
|
Glass Epoxy FR4 PCB Circuit Board Copper Clad Laminate Sheet Specification: 1. Over 10 years' pcb manufacturing experience 2. Quick sample service 2. 100% quality tested before shipment 3. ISO 9001,......
Shenzhen Xinchenger Electronic Co.,Ltd
|
ROHS Single Side FCCL Copper Clad Laminate with 0.5 ~ 2.0mils Thickness PI Film Mil Modified Epoxy Adhesive
|
...Copper Clad Laminate with 0.5 ~ 2.0mils thickness PI Film Mil Modified Epoxy Adhesive Quickly Introduction (Application:LED thin PCB) Base PI film: 0.5 ~ 2.0mils thickness; 50um,25um Copper foil: EDHD & RA copper both available, 1/3, 1/2, 1.0 & 2.0 Oz thicknesses; Adhesive: Modified epoxy adhesive, 8um,12um,20um,50um Laminate......
JIMA Copper
|
Rogers RO3203 10mil thick Double-Sided Copper Clad Laminate using in Automotive global positions satellite antennas
|
Double-Sided Copper Clad Laminate with Rogers RO3203 The double-sided copper clad laminate built with Rogers RO3203 is an advanced material specifically designed for high-frequency RF and microwave applications. Its 10mil (0.254mm) RO3203 substrate, ......
Shenzhen Bicheng Electronics Technology Co., Ltd
|
Thickness 0.1mm to 3.0mm Ceramic Board with Copper Clad Laminate Copper Thickness 18µm to 105µm Used in High Precision Electronic Components
|
Ceramic PCB Board with Copper Clad Laminate Item No: R0028 - Advanced ceramic substrate solution with thickness range from 0.1mm to 3.0mm and copper thickness options from 18µm to 105µm, designed for high-precision electronic components. Product Overview......
LT CIRCUIT CO.,LTD.
|
Fr4 PCB Copper Clad Laminate Pcb Circuit Board Fabrication
|
... PCBs and is fire-resistant. Therefore, these fiberglass epoxy laminated sheets are in great demand in PCB assembly. At FASTPCBA, we manufacture and deliver thousands of PCBs. We use high-quality materials with optimum skilled ......
FASTPCBA Co., Ltd.
|
Thick Power Supply PCB Board , Copper Clad Laminate PCB MCPCB Board
|
Thick 4.0 MM Copper Base PCB for Power Supply MCPCB Circuit Board The 1 layer single sided copper base PCB is applied for power supply devices, which board thickness is 4.0 mm. And its the minimum aperture is 0.1 mm and the line width and space are both......
Shenzhen Lefang Electronics Co., Ltd
|
1.6mm 6 Layer HDI Printed Circuit Boards Thick Copper Clad Design Custom Size
|
1.6-layer HDI thick copper board PCB HDI PCB, short for High-Density Interconnect Printed Circuit Board, is a high-precision circuit board that adopts microvias (blind vias, buried vias, stacked vias, etc.), fine conductors (usually line width/space ≤ 4mil......
Dongguan Xingqiang Circuit Board Technology Co., Ltd.
|
0.15 MM Double Layer PCB Board Ultra Thin Copper Clad Laminate PCB
|
2 Layer PCB Printed Circuit Board Ultra Thin Laminate PCB Main Features: 1 2 Layer FR4 substrate material printed circuit board. 2 ROHS, MSDS, SGS, UL, ISO9001&ISO14001 Certificated. 3 FR4 TG150 material, pcb thickness is 0.15 mm. 4 Green solder mask and ......
Witgain Technology Limited
|