Step Attenuator for Smooth Signal Control in DC-3000MHz 5W 10W RF Variable Attenuator
|
...: Frequency Range(MHz) DC-3000 VSWR ≤ 1.25 Attenuation(dB) 3 5 6 10 15 20 30 Accuracy(dB) ±0.6 ±0.6 ±0.6 ±0.8 ±0.9 ±1.1 ±1.6 Average Power(W) 10 Impedance(Ω) 50 RF Connector In: N-F/Out: N-F Color Gray Relative humidity 5%~95% Operating...
Anhui Bonfire Technology Co., Ltd
|
Digitally Controlled 10W RF Coaxial Attenuator , Fixed Coaxial Attenuator 50 Ohm
|
...ohm 10W N Male N Female RF Coaxial fixed Attenuators Coaxial fixed attenuators are used in absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF ......
SHENZHEN ZD TECH CO., LTD
|
6000MHz -155dbc 50W Black Programmable RF Step Attenuator
|
...RF Attenuator RF attenuators usually can be used to reduce the power of the signal within many RF circuit designs and RF systems. These RF attenuators can be fixed, switched,surface mounted or even continuously variable. Vinncom has many types of RF attenuators with different frequency range. Vinncom also can supply attenuators......
HeFei Vinncom Science And Technology Co.,LTD
|
VSWR 1.4 10W DC 2.5Ghz Variable Step Attenuator 167×30×20mm
|
Step Attenuators 10w 50Ω DC-2.5Ghz Connector NK-NK 167×30×20mm Variable/step attenuator can be used to adjust the power signal level continuously or by step within certain frequency range,they can also be used to adjust the test system’s power as inset attenuator . Power Rating: 10W Impedance: 50Ω Frequency(GHz): DC-2.5 Insertion Loss: 3.5dB Attenuation Range: 0-90dB In 1 DB Steps ConnectorNK-NK: NK-NK Attenuation Step......
Shenzhen Yulongtong Electron Co., Ltd.
|
10W 2.92mm 40Ghz 40dB Step RF Power Attenuator For Electrical Equipments
|
... IP65 Handling Power (Watt, max) 10 Interface 2.92mm Male - 2.92mm Female Operating Temperature ( ℃ ) -55~+85℃ Attenuation(dB) 10 20 30 40 VSWR DC~26.5 ±1.0 ±1.0 ±1.0 ±1.0 1.25 DC~32 -1.0/+1...
HeFei Vinncom Electronic Technology Co.,Ltd.
|
FC Singlemode Fiber Optic Attenuator , Coaxial 5dB Digital Step Attenuator
|
...5dB to 30dB attenuation with 5dB step with low tolerance. These reliable attenuators are able to accommodate up to 200mw high power and typically offer 50dB or more return loss. The FOCC FC Attenuator is available for single-mode with a wavelength range of...
FOCC FIBER OPTIC CO.,LIMITED
|
Keysight 84904L Programmable Step Attenuator DC To 40 GHz Compact Rugged Design
|
...Step Attenuator, DC to 40 GHz, 0 to 11 dB, 1 dB steps Description of Keysight (Agilent) 84904L: The Agilent 84904L programmable step attenuator offers coaxial measurements to 40 GHz in a compact, rugged design. It offers repeatability of better than 0.03 dB, excellent life (greater than 5 million switching cycles per section) and an attenuation range of 0 to 11 dB in 1-dB steps......
Shenzhen Meigaolan Electronic Instrument Co. Ltd
|
40dB rejection 10W RF Microwave Filter 3 to 18GHz Microwave High Pass Filter
|
3-18GHz High Pass Filter Zysen offer Suspended Substrate Stripline Filter, low and flat insertion loss in pass band, high stop band attenuation and low VSWR. The Maximum power handling is 15W CW, from 1GHz to 40GHz, Connector SMA, N, 2.92mm are available. ......
Chengdu Zysen Technology Co., Ltd.
|
5.8G 10W RF Power Amplifier Module 50Ω Input Output Impedance 2.5dB Noise Figure ≤-30dBc Harmonic Suppression
|
... Suppression of ≤-60dBc, Gain Flatness of ≤±0.5dB, Noise Figure of 2.5dB, Gain of 30 To 40dB and Output Power of 10 To 20W, our RF Jammer Module will meet your different needs....
VBE Technology Shenzhen Co., Ltd.
|
SSOP Reverse Amplifier IC Chips Step Attenuator ARA05050 New DC
|
ARA05050 INTEGRATED CIRCUIT CHIP , REVERSE AMPLIFIER WITH STEP ATTENUATOR High Light: programmable ic chips , integrated circuit chips Quick Detail: Reverse Amplifier with Step Attenuator Specifications: part no. ARA05050 Manufacturer ANAD supply ......
Shenzhen Huahao Gaosheng Technology Co., Ltd
|