IEC60695-11-5 Needle Flame Tester Flammability Testing Equipment
|
... test method – Apparatus, confirmatory test arrangement and guidance. Description of the test apparatus: Burner: The burner to produce the test flame shall consist of a tube at least 35 mm long with a bore of 0.5 mm ± 0.1 mm and an outer diameter not...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60695-11-5 Needle Flame Tester,Flammability Testing Equipment
|
...Flame Tester, IEC60695-11-5 Flammability Testing Equipment Introduction Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc. Needle Flame......
KingPo Technology Development Limited
|
Bunched Cable Vertical Flame Spread Flammability Test Equipment VFT-716 / IEC 60332-3 / KS C IEC 60332
|
Bunched Cable Vertical Flame Spread Testing Equipment, VFT-716, IEC 60332-3, KS C IEC 60332 Product Application: Bunched cable vertical flame spread tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting......
Dongguan Hust Tony Instruments Co.,Ltd.
|
ISO 6941 Flammability Testing Equipment 6941 Flammability Tester Burning Flame Height 0~60mm adjustable
|
... (coatings, quilts, multilayers, laminated products, and the like), curtain plackets and large tents including awnings and door covers for vertical flame propagation performance of textiles. test. This tester can only be used to assess the...
Guangzhou HongCe Equipment Co., Ltd.
|
560mmx170mm Flammability Test Equipment Adjustable Burning Height
|
...Flammability Test Equipment Adjustable Burning Height ISO 6941 Flammability Testing Equipment 6941 Flammability Tester Burning Flame Height 0~60mm adjustable Standard: ISO 6941 Application This tester is suitable for clothing with single or multiple components (coatings, quilts, multilayers, laminated products, and the like), curtain plackets and large tents including awnings and door covers for vertical flame......
Dongguan Kingpo Technology Limited
|
IEC606095 Flammability Test Equipment , K Type Glow Wire Tester
|
...Flammability Testing Equipment Accessories 1.Flame height gauge Material: thickness of 1-1.5mm stainless steel, IEC606095-11-4 picture 2, IEC606095-11-3 picture 2. Deal board Copper block Platinum pole Flame height gauge Use deal board of 20cm*20cm for glow wire testing Horizontal-vertical tester, needle flame tester dedicated thermometry copperΦ5.5,1.76g(50W)/Φ9,10g(500W)/4*6,0.58g(needle flame......
Guangzhou Shice Equipment Co., Ltd.
|
EN ISO 11925-2 Flammability Testing Equipment Building Material Ignitability Test Single Flame Source
|
...Test Single Flame Source Flammability Testing Equipment Description: Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
0.5Kva Flammability Test Equipment With Gas Round Mouth Bunsen Burner
|
... ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain flame height and a certain flame angle of the horizontal or...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
0.5Kva Flammability Test Equipment With Gas Round Mouth Bunsen Burner
|
...Flammability Test Equipment With Gas Round Mouth Bunsen Burner The flammability test is a simulated safety test according to IEC 60950: 1999, UL 94, IEC 707, IEC 695-2-2, ISO 1210: 1992 and other standards. The flammability test is to use a certain size of the Bunsen burner (Bunsen burner) and a specific gas source (methane or natural gas), according to a certain flame height and a certain flame......
Guangzhou Kinte Electric Industrial Co.,Ltd
|
UL94 Horizontal And Vertical Flammability Testing Equipment 500W 50W
|
...Flammability Testing Equipment 500W 50W Complied Standards & Clauses IEC 60695-11-10 “Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods” IEC 60695-11-20 “Fire hazard testing - Part 11-20: Test flames - 500 W flame test method” IEC 60695-11-4 “Fire hazard testing - Part 11-4: Test flames - 50 W flame - Apparatus and confirmational test method” UL 94 “Tests......
Sinuo Testing Equipment Co. , Limited
|
Submit your “12mm flame height flammability testing equipment” inquiry in a minute :