W70Cu30 14g/cm3 CuW Alloy Rod Tungsten Copper Rod
|
Tungsten Copper Alloy Rod CuW Alloy Rod Tungsten Copper Rod Tungsten Copper Alloy Rod contains 6-50% (weight ratio) of copper, and has the advantages of tungsten and copper: high temperature resistance, arc ablation resistance, high strength, high specific......
JINXING MATECH CO LTD
|
18.5g/Cm3 Density Tungsten Copper Alloy Rod Diameter 30mm For Electronic Industry
|
...copper alloy rod is a high-performance alloy material composed of two metal materials, tungsten and copper. Its production process is to mix tungsten and copper according to a certain ratio and then sinter at high temperature. Tungsten-copper alloy rod has...
Shaanxi Peakrise Metal Co.,Ltd
|
18.5g/Cm3 Density Tungsten Copper Alloy Rod Diameter 30mm For Electronic Industry
|
|
...copper alloy rod is a high-performance alloy material composed of two metal materials, tungsten and copper. Its production process is to mix tungsten and copper according to a certain ratio and then sinter at high temperature. Tungsten-copper alloy rod has...
Shaanxi Peakrise Metal Co.,Ltd
|
17.8-18.3g/cm3 W95NiFe Tungsten Heavy Alloy Rod Tungsten Nickel Iron Rod
|
...cm3 W95NiFe Tungsten Alloy Rod Tungsten Nickel Iron Rod Specification Product Name WNiFe WNiCuTungsten Alloy Rod Material Tungsten Nickel Iron Alloy Density 15.8-18.50g/cm3 Composition W content: 85-97%, W-Ni-Fe Surface Sinter state, finish state Size according to your drawing or requirement. Application balance weight, Military industry Introduction Heavy Tungsten Alloy......
Zhengzhou Sanhui Refractory Metal Co., Ltd.
|
10g/Cm3 Polished Moly Alloy Rod
|
...alloy rod bar MoLa rod for high temperature furnace Molybdenum rod bar from Sifon:· Molybdenum rods are widely applied for heating elements in high temperature furnaces, electrodes, screws, rabbles in rare earth smelting industry, heating electrodes in glass industry and support of lamp in the lighting industry, etc. 1. The density of our molybdenum rods is from 9.8g/cm3 to 10.1g/cm3......
Fonlink Photoelectric (Luoyang) Co., ltd
|
H6 Fine Polished Tungsten Alloy Rod , Lightweight Carbide Tool Blanks
|
... size Cobalt Content (%) Density g/cm3 Hardness HRA TRS N/Mm2 YG8 Medium 8 14.7 89.5 2200 YL10.2 Extrafine 10 14.42 91.8 ......
Hunan TRX International Co., Ltd.
|
1 / 4'' 1 / 2 '' 1 '' Monel 600 Nicr Alloy Rod Monel 400 Monel K500 ASTM B 165 N04400
|
1 / 4'' 1 / 2 '' 1 '' Monel 600 Nicr Alloy Rod Monel 400 Monel K500 ASTM B 165 N04400 Elements Ni Cu Fe C Mn Si S % 66.5 31.5 1.3 0.15 0.25 Density: 8.83 g / cm3 Rigidity: HB160-280 Melting point: 1300-1390 ℃ Tensile strength: 480 Rm N / mm2 Yield strength......
Shanghai Tankii Alloy Material Co.,Ltd
|
Polished Solid Carbide Round Blanks , Precision Tungsten Alloy Rod 14.2~14.6 G/Cm3
|
Polished Solid Carbide Round Blanks , Precision Tungsten Alloy Rod 14.2~14.6 G/Cm3 Cemented carbide is a hard material used in machining tough materials such as carbon steel or stainless, as well as in situations where other tools would wear away, such as ......
Zhuzhou Zonco Sinotech Wear-resistant Material Co., Ltd.
|
Solid Round Titanium Alloy Rod GR9 For Heat Corrosion Resistant Industrial
|
...Alloy Round Rod GR7 Solid Titanium Bar for Heat and Corrosion Resistant Industrial Titanium 1. Product description Material: GR1 GR2 Gr5 GR7 GR9 (Ti-3AL-2.5V) Standard : ASTM B348 ASTM B337 ASTM B862 ASTM B861 Density: 4.51g/cm3 Size: OD 1 to 120mm, Length at customers’ requirement Name Titanium Bars/Rods......
Baoji Lihua Nonferrous Metals Co., Ltd.
|
10.2G/Cm3 Molybdenum Mo Rod High Temperature Resistant Corrosion Resistance
|
High Quality 10.2G/Cm3 99.95% Purity molybdenum rod high temperature corrosion resistance Product Description Shipping According to the consumer’s requirements. operating temperature 1000-1800℃ Company Profile Luoyang Forged Tungsten Molybdenum Material......
Luoyang Forged Tungsten-Molybdenum Material Co., Ltd.
|
Submit your “14g cm3 cuw alloy rod” inquiry in a minute :