LTT Low Temperature Torque Tester For Grease Machine Power ≤1700W
|
...Low temperature torque tester for grease SH0338 Low temperature torque tester is suitable for the determination of low temperature torque of ball bearing grease below -20℃, in line with SH/T0338-92. The instrument adopts double compressor refrigeration, refrigeration fast, good effect, the instrument simple structure, beautiful appearance, is very suitable for laboratory use. ASTM D1478 Low Temperature Torque......
Shandong Shengtai instrument co.,ltd
|
ASTM D1478 Low-Temperature Torque Test Equipment with Standard 204 Bearing
|
...Low-Temperature Torque Test Equipment Introduction The Low temperature torque tester uses a standard 204 bearing for testing. After 2 hours of stationary and constant temperature at a specified temperature, it rotates at a specified speed to determine its starting torque and running torque......
Advanced Instruments Co.,Limited
|
Direct Cooling Ultra Low Temperature Freezer with PTC Sensor and OEM Service
|
...-low temperature storage. With a cooling freezer system powered by 1700W of energy, this freezer is capable of reaching and maintaining extremely low temperatures, making it ideal for storing sensitive samples and specimens. Equipped with a PTC sensor,...
Hefei Gonidea International Trade Co., Ltd.
|
New Condition Plug Socket Tester Low Temperature Impact Test Apparatus IEC60884-1 Figure 42
|
...Low Temperature Impact Test Apparatus 1. Introduction of Low Temperature Impact Test Apparatus: Low temperature impact test apparatus is designed according to IEC60884-1 clause 30.4 figure 27 & figure 42, IEC60811-1-4, VDE0620, GB2951.4, GB2099.1 clause 24.4 and 30.4 figure 27 & figure 42 and etc. It is applied to do the impact test under the condition of low temperature......
Pego Electronics (Yi Chun) Company Limited
|
1 Or 3 Stations Switch Life Tester IEC 60884-1 Figure 27 And 42 Power Cables Low Temperature Impact Test Apparatus
|
...Low Temperature Impact Test Apparatus Product information: The low temperature impact test apparatus meets the requirements of IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on. This device is used to check the impact resistance at low temperature of electrical accessories, as well as wires and cables. Equipment characteristics: This device should be used with low temperature...
Sinuo Testing Equipment Co. , Limited
|
Liquid And Gas Low Temperature Gear Operator For Use On 90° Rotary Butterfly Valves
|
Low Temperature Gear Operator cast iron gray iron nodular cast iron S008 series partial-turn gear operators This series is available in 13 models with the speed ratio varying from 42:1 to 2292:1 and the torque ranging from 720NM to 100000NM. The torque ......
SUZHOU SIP STARD AUTOMATION CO.,LTD.
|
ISO 6722 SAEJ 1128 Automotive Electrical Wire Low Temperature Impact Testing Instrument
|
...Low-Temp Impact Test Apparatus SAEJ 1128 Vehicle Wire Low-Temperature Impact Tester Product Description Test standard ISO 6722, ISO 14572, ISO 19642, SAEJ 1128, QC/T 730, JASOD 611-2009 ISO 19642 6722 Automotive Electrical Wire Low-Temp Impact Test Apparatus SAEJ 1128 Vehicle Wire Low-Temperature Impact Tester Technical Specification Low-Temperature......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Low Temperature Pressure Impact Test Apparatus
|
...Low Temperature Pressure Impact Test Apparatus, IEC Test Equipment Product information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature......
Guangzhou Shice Equipment Co., Ltd.
|
Manual Plug Socket Tester For Checking The Impact Resistance At Low Temperature Test
|
... Resistance At Low Temperature Test Apparatus Standard: IEC 60884-1 2013 clause 24.4, 30.4, figure 27 and 42, IEC60811-1-4, VDE0620 and so on Application: This device is use for checking the impact resistance at low temperature of electrical accessories......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60811-1-4 100mm Height Low Temperature Impact Test Apparatus
|
....4 IEC60811-1-4 ‘Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Four: Tests at low temperature’ Application: This device is use for checking the impact resistance at...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
