Nickel Copper Rod CuNi34 Nickel Copper Alloy 400 MPA From Factory
|
... to manufacture rheostat, shunt, controller and other low voltage electrical components with a maximum operating temperature of 300°C. Due to its good heat coefficient, this alloy is widely used in low temperature heating cable of...
Changzhou DLX Alloy Co., Ltd.
|
Solid Solution Alloy Stainless Steel Pipe Fittings Welded Nickel - Copper Alloy 400
|
...Nickel Alloys 400 Characteristics − Nickel-copper alloy 400 is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Typical Applications − Alloy 400......
BEST PIPELINE EQUIPMENT CO.,LTD
|
Nickel Copper Alloy 400 Sheet
|
...steel wire rod alloy 400 nickel bar Monel K500 has approximately twice the tensile strength and triple the yield strength of Alloy 400. The strength of Monel K500 is maintained to 1200 degrees Fahrenheit, but stays ductile and tough down to temperatures of...
Jiangsu Taigang Puxin Stainless Steel Co., Ltd.
|
Monel 400 alloy UNS N04400 nickel-copper Alloy 400 resistant to sea water and steam at high temperatures China Origin
|
...ALLOY 400UNS N04400 Alloy 400 Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy......
Suzhou Xunshi New Material Co., Ltd
|
Monel 400 Round Bar Stock , Nickel Copper Alloy 400 ASTM Standard
|
... in hydrofluoric acid and fluorine gas media, and is one of the few materials that can come into contact with nitrogen, hydrofluoric acid and hydrogen fluoride or their compounds. Monel 400 alloy does not perform well...
Shanghai Walmay Metal Group Co., Itd
|
Tisco Nickel Copper Alloy 400 Plate K500 R405 Monel Metal Hot Forged
|
...-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and...
Jiangsu TISCO Technology Co., Ltd
|
forged nickel copper alloy 400 rod
|
...400 r405 alloy rod bar Rods 5/16 to 3/4 in. (7.94 to 19.05 mm) excl in diameter, hot- or cold-finished, solution annealed and pickled or mechanically descaled. Rods 3/4 to 31/2 in. (19.05 to 88.9 mm) incl in diameter, hot- or cold-finished, solution annealed, ground or turned. Nickel-Copper Alloy Rod, Bar, and Wire nickel-copper alloys......
AW SUNNY STEEL
|
ASTM B165 UNS N04400, Monel 400, 2.4360 Nickel Copper Alloy Steel Seamless Pipe
|
...400, 2.4360 Nickel Copper Alloy Steel Seamless Pipe Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy......
Yuhong Group Co.,Ltd
|
Forged Nickel Copper Alloy Monel 400 Round Bar Round / Square Shape High Tensile
|
... has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and...
Suzhou Vanforge Metals Co., Ltd.
|
CuNi Alloy Resistance Wire For Electric Elements / Monel 400 Nickel Copper Alloy Wire
|
... low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400® also has excellent resistance to stress corrosion cracking in most freshwaters. Monel 400® can be used in temperatures up to 1000 ºF. The alloy has...
Shanghai Tankii Alloy Material Co.,Ltd
|
Submit your “180mm nickel copper alloy 400” inquiry in a minute :