0.9mm SC APC 1x2 1310/1550nm Fiber Optic Fused Coupler
|
1x2 1310/1550nm Fiber Optic Fused Coupler Steel Tube 0.9mm SC/APC 5/95 Singlemode wideband coupler can make the optical singal re-coupled in the special couple area during the transmission, then reassigned the optical power. Optional Coupling ratio.The Singlemode Optic-fiber Tree and Star Couplers can couple the optical......
Shenzhen Unifiber Technology Co.,Ltd
|
SC APC 1X2 Fiber Optic FBT Coupler , 1550nm Triple Window Coupler
|
... small size, high reliability ,cheap cost and good channel-to-channel uniformity,and is widely used in PON networks to realize optical signal power splitting. SUNET provides whole series of 1xN and 2xN spliiter products that are...
Qingdao Sunet Technologies Co., Ltd.
|
Multimode Fiber Optic Fused Coupler 1 × 2, FC / LC connector
|
... of 50um or 62.5um. Multimode fused fiber optic couplers are wavelength independent over a broad range of wavelengths with uniform power splitting and distribution It is with equal ratio. They are mainly used in telecommunication equipment, ......
Shenzhen Fu Ou Ke Communication Equipment Co., Ltd
|
LC SC FC Multimode Fused 1x2 Fiber Optic Splitter MM FBT Coupler
|
...1x2 Fiber Optic Fused Splitter MM FBT Coupler Quick informations: Name: FBT coupler Cable diameter: 2.0mm, 3.0mm Cable length: 1.0m Terminal connecter: FC, SC, LC or optional Rate: 10/90 or customer request Pack: ABS box Description: Dual Window Wideband Couplers are high quality components designed to divide or combine optical signal in optical fiber system. These devices are fabricated by using the fused......
KOCENT OPTEC LIMITED
|
LC SC FC Multimode Fused 1x2 Fiber Optic Splitter MM FBT Coupler
|
|
...1x2 Fiber Optic Fused Splitter MM FBT Coupler Quick informations: Name: FBT coupler Cable diameter: 2.0mm, 3.0mm Cable length: 1.0m Terminal connecter: FC, SC, LC or optional Rate: 10/90 or customer request Pack: ABS box Description: Dual Window Wideband Couplers are high quality components designed to divide or combine optical signal in optical fiber system. These devices are fabricated by using the fused......
kocent optec limited
|
1×2 Fiber Optic WDM Coupler 1310nm 1490nm 1550nm For PON EDFA
|
... input to be split into 2 outputs. The PANDA fiber used in these couplers allows them to provide a high extinction ratio for light launched into the slow axis of the fiber. Features. FBT WDM Benefit&Features: Variety of coupling ratios (1x2, 1x4, 1x6, etc)...
Wuhan Geehe Optical Communication Co.,ltd
|
1x2 Fiber Optic Audio Splitter 1310 1490 1550nm Triple Window Coupler With SC/APC Connector
|
1x2 Fiber Optic Splitter 1310nm 1490nm 1550nm Triple Window Coupler with SC/APC Connector Description 1x2 Single Mode 1310/1490/1550nm Triple Window Coupler manufactured by ANC International Co., Limited is mainly to distribute light from a main fiber into two or more fibers. Fused Biconical Taper (FBT) Splitter is made by wrapping two fiber cores together, putting tension on the optical fibers, and then heating the junction until the two fibers...
ANC International Co., Limited
|
Single Mode Fiber Optical FBT Coupler 1x2(2x2) with low insertion loss
|
... ratio from 50/50 to 1/99 and fiber type 250um bare fiber, 3mm and 900um loose tube fiber are available with very tight uniformity. Singlemode standard coupler and wideband coupler components find extensive application to perform power splitting and...
Shenzhen Jiangfan Communication Equipment Co., Ltd.
|
780nm 1x2 Polarization-Maintaining (PM) Fiber Optic Splitters/Couplers/Taps
|
Fiber Optic Splitters/Couplers/Taps 780nm 1x2 Polarization-Maintaining (PM) Description These 1x2 Polarization-Maintaining (PM) Fiber Couplers are designed for operation at 780 nm and are available with a 50:50, 60:40, 70:30, 75:25, 80:20, 90:10, or 99:1 coupling ratio. 1x2 couplers have only one input port for simplified use and cable management. These couplers......
Shanghai Yogel Communication Equipment Co., Ltd.
|
Environmental Stable 1x2 Fiber Optic Splitter for Network Redundancy
|
...1x2 Fiber Optic Splitter for Network Redundancy 1x2 Fiber Optic Coupler without connectors, Steel Tube package, 0.9mm cable Optical Splitter/Coupler is an optical device that combines or splits power from optical fibers. It divides light from a single fiber into two or more fiber......
Shenzhen CY COM Product Co., Ltd
|
Submit your “1x2 fiber optic fused coupler” inquiry in a minute :