100-200 mPa.s Viscosity Blend Polyol blowing agent 141B FRD 30
|
JYSP-102 Blend Polyol for spray foam Blend Polyol With 141B Blown Agent For The Spray Foam FRD 30 Introduction: JYSP-102 is a blend Polyol which contains the blowing agent 141B, some base Polyol or Polyester Polyol, catalyst, fire retardant ect. It can be ......
JOYWAY INDUSTRIAL COMPANY LIMITED
|
VP-IR04 C5H10O2 Polyurethane PIR Panel Blend Polyols for Strong Rigid Foam Insulation
|
...blend polyols and isocyanate react to be foam with good flame retardant performance,good insulation effect, light quality, higher compressive strength. The blowing agent is HFC-245fa as environmental friendly blowing agent.The products are widely used in the production of continuous panel, suitable for low pressure machine and high pressure machine. Physical property Appearance Hydroxyl value mgKOH/g Dynamic viscosity(25ºC) mPa......
Vida New Material Technology Co., Ltd.
|
Mine Product Polyether Polyol Colorless Transparent Liquid
|
...Polyol for Mine Product 1. Description This series of polyether polyols is special for mine product. 2. Typical foam properties Type Mixing ratio (by volume) Raw material properties Reaction performance indications Component Appearance Viscosity at 25℃(mPa·s) Compressive strength The highest temperature Expansion ratio(s) Flame retardant M0101/02 1:1.0 A Colorless transparent liquid 200......
Qingdao Exceed Fine Chemicals Co.,Ltd
|
Flash Point Over 200\u00b0C Polyether Polyol With Viscosity 100-1000 MPa.s
|
Product Description: The formula for this Polyether Polyol product is H·(C4H8O)n·OH, which means it is a type of polyol that contains repeating units of propylene oxide. This gives it unique properties that make it an important ingredient in the production......
Hangzhou Yaoyang Technology Co.,Ltd
|
Dry Blend Matting Good Flow Tgic Saturated Polyester Resin For Powder Coating
|
...Blend Matting Good Flow Tgic Saturated Polyester Resin For Powder Coating Code Type Acid Value (mgKOH/g) Viscosity (mPa.s/200℃) T g (℃) Curing (℃/min) Properties YC8533 93:7 30-35 2000-4000 ≥62 200/15 Superdurable, high flow, can dry blend with YC8550 to reach matt Related Product Introduction Code Type Acid Value mgKOH/g Viscosity mPa.s/200℃ T g ℃ Curing ℃/min Properties YC8011 93:7 29-36 4000-6000 ≥64 200......
Anhui Yochon New Materials Co.,Ltd
|
Submit your “200 mpa s viscosity blend polyol” inquiry in a minute :