Home > Machinery > Woodworking Machinery > Finger Jointer >

25mm Conical Test Finger Probe

1-10 Results for

25mm conical test finger probe

from 49 Products

Jointed Test Finger Probe

...Test Finger Probe Jointed Test Finger Product Details material: metal, except where otherwise specified linear dimensions in milimeters tolerance on dimensions without specific tolerance: on angles: 0/-10° on linear dimensions: up to 25mm: 0/-0.05 over 25mm: +/-0.2 both joints shall permit movement in the same plane and the same direction through an angle of 90°with a 0 to +10° tolerance. Hot Tags: Jointed Test Finger......

Dongguan Kingpo Technology Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Accessability Test Finger Probe Conincal Pin Head 3 Mm IEC61032 Standard

Test Probe 13 Conincal Pin Conforms to IEC61032 Accessability Test Finger Probe Introduction: It is designed according to IEC61032 figure 9. The pin is intended to verify the protection against access to hazardous live parts in class 0 equipment and class II equipment (see IEC60536). Specification: diameter of test pin head 3mm, bottom 4mm length of test pin 15mm diameter of baffle 25mm......

Pego Electronics (Yi Chun) Company Limited

Address: No. 317, Yichun South Road ( Happiness Park), Yuanzhou District, Yichun, Jiangxi, 336000, China

IEC60335-2-14 Test finger Probe With Diameter 125mm Circular Stop Face Probe Length 100mm

...Test Probe With Diameter 125mm Circular Stop Face, Probe Length 100mm Standard of Test Finger Probe: IEC61032 figure 2 test probe B, IEC60335-2-14 clause 20.2. Application of Test Finger Probe: This probe is intended to verify the stability and mechanical hazards of blenders. Test sample of Test Finger Probe: Blenders. Feature of Test Finger Probe: A test probe similar to that of test probe......

Guangzhou HongCe Equipment Co., Ltd.

Address: No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou

IEC 60529 Jointed Test Finger Probe Stainless Steel With 50N Force

Test Finger Probe Access Probes of IEC 60529 Jointed Test Finger With 50N Force Standard: IEC 60529 Degrees of protection provided by enclosures (IP Code) Figure 1 – Jointed test finger. IEC 61032 Protection of persons and equipment by enclosures –Probes for verification Figure 2–Test probe......

HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD

Address: No.6-36, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou, Guangdong, China

IEC61032 Children Safety Small Test Finger Probe 19

... Probe is the necessary appliance to prevent electic shock for household and similar electrical problem Technical Parameters: 1. Knurled Finger Diameter: 5.6mm 2. Knurled Finger Length: 44mm 3. Head Radius: 2.8mm 4. The First Headle Diameter: 25.9mm 5. The...

Guangzhou Shice Equipment Co., Ltd.

Address: #1,chencongxi10xiang,chencongcun,qiaonanjiedao,panyu,Guangzhou

Test Finger Probe

... parts. It is also used to verify the protection against access with a finger. Test sample: Easily accessible enclosure live parts or mechanical parts. Feature: This test finger probe consists of dito, finger, base and insulated handle which simulates the...

shanghai kerang technology co ltd

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Small Child test finger probe,jointed test finger probe,child sfety test

...test finger probe,jointed test finger probe Model TP18 IEC 61032, Figures 12 Small Child test finger probe,jointed test finger probe ( 0 - 36 months ) Model TP19: IEC 61032, Figures 13 Small Child test finger probe,jointed test finger probee ( 3 - 14 years ) These size test fingers are to test for protection against access to hazardous parts with a human finger and / or arm. These are high precision probes......

ALLIED TESTING (HK) CO.,LTD.

Address: Unit 04,7/F,Bright Way Tower,No,33 Mong Kok Road Kowloon,HK.

Test Probe 11 , IEC61032-Figure 7 Test Finger Probe , Unjointed Test Finger

... 4, Dam- board Length:100mm 5.M6 thread at the end of the probe(can be connected to the push-pull gauge) Packaging and Shipping 1. Aluminium box and carton box, careful and tight package, make sure the ......

KingPo Technology Development Limited

Address: RM C, 13/F, HARVARD COMMERCIAL BUILDING, 105-111 THOMSON ROAD, WAN CHAI, HK

Finger diameter 5.6mm ISO 8124-1 Standard Test Finger Probe for toys

...ts of toys can be touched. If it is accessible, then conduct the related test according to standards so as to reduce the damage hazards for children. This tools include 2 models: Probe A and Probe B: 1. An accessible part for a toy or article intended for...

Gester International Co., Ltd

Address: No.15, Chifeng Road,Licheng Region, Quanzhou city of Fujian,PR China.

ASTM F963 EN-71 Test Finger Probe Toys Testing Equipment For Children Safety

...Test Finger Probe Toys Testing Equipment For Children Safety Description: The simulated finger is designed according to the standard of ASTM F963 and EN-71 as well as16CFR 1500.48,49. It is used to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe......

DONGGUAN YUYANG INSTRUMENT CO., LTD

Address: B1505, FORTUNE PLAZA, No.1, Yuanmei Road, Nancheng District, Dongguan City, Guangdong Province, China

Submit your “25mm conical test finger probe” inquiry in a minute :

*From:	Your email address is incorrect!
To:	DONGGUAN YUYANG INSTRUMENT CO., LTD Products: ASTM F963 EN-71 Test Finger Probe Toys Testing Equipment For Children Safety
*Subject:	Your subject must be between 10-255 characters!
*Message:	For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000 characters!
	Please reply me within 24 hours. Yes! I would like your verified suppliers matching service! Yes! If this supplier doesn't contact me in 3 days, I want everychina.com to recommend me more suppliers.

Submit “25mm conical test finger probe” inquiry

*From:
Your email address is incorrect!
To: Dongguan Kingpo Technology Limited
*Subject:
Your subject must be between 10-255 characters!
*Message:
For the best results, we recommend including the following details: --Self introduction --Required specifications --Inquire about price/MOQ Your message must be between 20-3,000
Yes! I would like your verified suppliers matching service!

Inquiry Cart 0