Outdoor 33GHz 2W 3.5mm Male RF Dummy Load For Led Lights
|
33GHz 2W 3.5mm Male RF Dummy Load Part Number VN-DL-33G-2W-3.5M Operating Frequency DC-33 GHZ Impedance ( Ohm ) 50 Application Application Degree of Protection IP65 Handling Power (Watt, max) 2W Interface 3.5 Male Operating Temperature ( ℃ ) -55~+125℃ ......
HeFei Vinncom Science And Technology Co.,LTD
|
30 Watts 3.8G DIN Male RF Dummy Load Termination
|
...Male RF Dummy Load Termination Wide band Good VSWR Good water resistance Part Number VN-LD-4G-30W-ODm Operating Frequency ( GHz ) 0-4 Impedance ( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×37dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 Operating Temperature ( ℃ ) -40 ~ + 80 Interface Din Male......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
Capacity 350-6000MHz N Male RF Dummy Load 100W Termination Load for Ibs/Das Projects
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
DC-3GHz 300 W N Female Connector Coaxial RF Dummy Load with 50 Ohm
|
...RF Dummy Load with 50 Ohm RF dummy load introduction: N male RoHS Aluminium black oxide dc 3GHz 5W 50 ohm RF dummy load is a device used to simulate an electrical load during testing. In an RF System a dummy load is used to simulate an antenna. By using a dummy load instead of an actual antenna, the transceiver can be tested and configured without radiating radio waves. N male......
SHENZHEN ZD TECH CO., LTD
|
F Male Terminator, RF Dummy Load
|
F Male Terminator, RF Dummy Load 1. Low cost 2. ISO 9001 & TS 16949 certified 3. RoHS & REACH compliance 4. Made in China Features: Excellent insertion/withdrawal ......
Changzhou H .N . Electronic Co., Ltd.,
|
TNCA Male 2 Watt RF Coaxial Load Termination 23.5mm / 0.925″ Length DC - 18GHz
|
...Ω impedance, VSWR 1.4:1 (max) for DC~18GHz, 500 cycles durability and -55°C~+125°C operating temperature. The low-power matched RF load designed and produced by Xi'an Elite Electronics has an impedance of 50 Ω, including SMA, SSMA, SMP, SSMP, CSMP,...
Xi'an Elite Electronic Industry Co., Ltd.
|
100 Watt RF High Power Dummy Load Din Male Connector 160dBc PIM VSWR 1.2 IP 67
|
...RF Load Dummy Load 4.3 - 10 or Din Male Connector 160dBc PIM Description: 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm 4. IP 67 , outsider , good waterproof. 5. Connector :4.3-10 male Specification: Type No. Load......
Lenolink Telecommunication Co.,Ltd
|
N male Connector Termination dummy load N-50JR-18A
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or ......
Terui International Group Co.,Ltd.
|
Brass 2 Watt RF Load Termination 18GHz Dummy Load 50 Ohm
|
2Watt SMA 18GHz coaxial Termination Zysen's 2W Wideband (DC-18 GHz) terminations available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.15 Typ. Electrical Specifications Frequency Range DC – 18GHz Power 2W CW at 25°C (Derated linearly......
Chengdu Zysen Technology Co., Ltd.
|
VSWR 1.25 21×33.5mm Coaxial Terminations 5W Dummy Load DC 12.4GHz
|
...Series 50Ω 5w Connector N DC-12.4 Max VSWR1.25 21×33.5mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave devices such as ......
Shenzhen Yulongtong Electron Co., Ltd.
|