50 Watts 3.8GHz Dummy Load For Amplifier Testing
|
...8GHz 4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy...
HeFei Vinncom Science And Technology Co.,LTD
|
DC-3.8GHz 30W N Female Connector GSM Dummy Load RF Dummy Load Termination Load
|
DC-3.8GHz 30W N Female Connector GSM Dummy Load RF Dummy Load Termination Load Product Description Operating Frequency( GHz ) 0-3.8 Impedance( Ohm ) 50 VSWR ≤1.20 IM3 (dBc @ 2×34dBm) -110 / -120 Application Indoor & Outdoor Degree of Protection IP65 ......
SHENZHEN ZD TECH CO., LTD
|
10 Watts DIN Female 3.8GHz Copper BNC Reactive Dummy Load
|
10 Watts DIN Female 3.8GHz 4GHz RF Dummy Load Termination Better heating shrink Wide band Good VSWR Part Number VN-LD-4G-10W-ODf Operating ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
Continuous Working Dummy Load Bank , Manual Variable Resistive Load Bank
|
..., generator sets for all main electrical parameters including the dynamic parameters tested. Application AC400V - 500kW Dummy Load Bank can be used with a computer to realize automatically completing the special test and the intelligent control to all...
Hebei Kaixiang Electrical Technology Co., Ltd
|
DC 8GHz Coaxial Terminations VSWR 1.3 Dummy Load 50 Ohm 100 Watt
|
...76×76mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave devices such as circulators and directional couplers to make these ports......
Shenzhen Yulongtong Electron Co., Ltd.
|
50kW 650V-1000V DC Dummy Load Bank Portable Variable Resistive Load Bank Cabinet
|
50kW 650V-1000V,DC Portable Variable Resistive Dummy Load Banks Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power rating ......
Shenzhen Zenithsun Electronics Tech.CO.,LTD
|
200KW Generator Testing Dummy Load Bank
|
...Dummy Load Bank offers the most robust, high-capacity designs in the industry. Generator Testing Dummy Load Bank is setting the standard with intelligent operator controls, safety indication layouts, adjustable load step resolution, and lightweight designs. Generator Testing Dummy Load......
Hebei Kaixiang Electrical Technology Co., Ltd
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
N Male Cu RF Load Termination 2.92mm 50 Watt Dummy Load
|
50W DC-18GHz N connector Coaxial Termination DC-4GHz, 8GHz,12.4GHz,18GHz are available with N, SMA connector . Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.92mm or chip, ......
Chengdu Zysen Technology Co., Ltd.
|
0.5watt RF Coaxial Connector SMP Dummy Load Terminator 40GHz 50Ohm
|
... Dummy Load Terminator 40GHz 50Ohm Optional Factory Supply Xi'an Elite Electronc ‘s SMP Male RF Load – Termination is a Push On designed that offers 50Ohm impedance and is rated for a maximum frequency of 40GHz. The low-power matched RF load designed......
Xi'an Elite Electronic Industry Co., Ltd.
|