Automatic Gas Burner Ignition Electrode For Kitchen Equipment
|
...Ignition igniters electrode for gas burner: Specification: 3 needle type Material: Alumina ceramics rod, Magno pin Purpose of Ignition igniters electrode for gas burner: Ignite, Response High quality and competive price Features of Ignition igniters electrode for gas burner: 1) Materials:95% aluminum ,ceramic 2) Voltage resistance:16-25KV 3) Available for gas utensils and portable gas......
Chongqing Haodong Technology Co., Ltd.
|
NG/LPG thermocouple of fireplace parts with ignition electrode for gas burner
|
...
Yueqing Kampa Electric Co., Ltd.
|
Sinopts Electrode Spark Plug Ceramic Igniter Generator for Gas Stove
|
... bracket, and a terminal. Product Name Spark electrode pin Applicable gas species Natgas, LPG, artificial coal gas etc Temperature resistance Ceramic≥1200ºC Ignition line≤250ºC Electrode needle OCR25AL5, SUS310, SUS304 Cable UL1332, UL3573, UL3304,...
JINAN SINOPTS ENERGY TECHNOLOGY INC.
|
Precision One Inch Lighter Gas Valve for Burner Pilot Lines and Ignition Trains with Fine Flow Adjustment and Lockable Handle
|
...Precision One Inch Lighter Gas Valve, specifically engineered for burner management systems requiring meticulous flow regulation. This high-performance gas metering valve features a calibrated needle valve mechanism integrated within its robust brass body,...
Hebei Jincheng Aerosol Valve Manufacture
|
IEC60695-11-5 Flammability Tester Needle Flame Tester
|
....5-2008,GB4706.1-2005 ,etc. Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen ignite ,lasting ignition time and...
KingPo Technology Development Limited
|
Gas Steel Wire Bending Tester Needle Flame Burning Test Machine Gas Body 95% Butane
|
...-shaped burner of a specified size (Φ0.9mm), and uses a specific gas (butane) to ignite the sample at a 45° angle to see if the sample is ignited and burned. And the length of the burn to assess the fire risk of small flames inside the equipment due to...
Dongguan jie dong test equipment co.,LTD
|
Ф0.9mm IEC60695-11-5 IEC Test Equipment Needle Flame Test Apparatus
|
.... The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester conforms to the standard requirement of...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60335-1 Needle Flame Test Apparatus For Test Flammability And Fire Resistance Of Materials
|
... angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This...
Sinuo Testing Equipment Co. , Limited
|
220V 50Hz Ф0.9mm Needle Flame Test Chamber With 45 Degree Angel
|
...t tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and...
Dongguan Kingpo Technology Limited
|
Needle Flame Flammability Electrical Safety Test Equipment IEC60695-11-5 12 Months Warranty
|
...Needle Flame Flammability Testing Equipment - 12 Months Warranty 1. Introduction The Needle Flame Tester consists of a dia.0.9mm needle burner that tilts to 45 degree from the vertical and is fueled with butane gas. The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. The equipment specifies a needle......
Pego Electronics (Yi Chun) Company Limited
|
Submit your “3 needles gas burner ignition electrode” inquiry in a minute :