Stainless Steel 304L 316L Slip On Flanges With Cl600lbs 300lbs
|
.... The pressure rating of flange ranges from 150# to 2500#. The term "lb", "class" and "#" are used interchangeably to designate the pressure rating of the flange. The fact is that 150 lb has no relation to 150 psi and so does the 300 or 600 lb does not...
SHIJIAZHUANG DEYE PIPING INDUSTRY CO., LTD（Pipefittings Department)
|
DIN2576 F316L Stainless Steel Slip On Flange Socket Weld Forged Flange
|
... steel 316L flanges, exhibit mechanical properties nearly equivalent to standard 316 grade stainless steel. Like most low carbon stainless steel alloys, grade 316L is less prone to intergranular corrosion. The absence of higher carbon content in the...
Yuhong Group Co.,Ltd
|
ASME B16.5 Slip On Pipe Flanges , 316L Duplex SS Slip On Flange Size 1/2" - 60"
|
...Slip On Pipe Flanges 316L Duplex Stainless Steel 1/2" - 60" Size 1. Duplex stainless steel 316L SO definition Slip On Flanges are preferred by some contractors, over the Weld-neck, because of the lower initial cost. However, this may be offset by the added cost of the two fillet welds required for proper installation. The strength of the slip-on flange......
BoYue Industrial (Shanghai)Co., Ltd.
|
Stainless Steel 316Ti RF EN1092 Slip On Flange
|
... steel pipes, pipe fittings, etc. into the flange and is connected to the equipment or pipeline through the fillet weld. The neck height of the flat welded flange with a neck is lower, which improves the stiffness zd and bearing capacity of the flange....
WENZHOU ZHEHENG STEEL INDUSTRY CO;LTD
|
Forged ASME B16.5 SO Slip On Flange 316L Duplex Stainless Steel 1/2" - 60" Size
|
...lower initial cost. However, this may be offset by the added cost of the two fillet welds required for proper installation. The strength of the slip-on flange is ample for it’s rating, but its life under fatigue conditions is considered to be only one...
Zhengzhou Huitong Pipeline Equipment Co.,Ltd.
|
Welding Neck 316L Stainless Steel Flange ISO Slip On Flange
|
...flange plate flange, slip on flange Size range: 1/2" to 80" DN15 to DN2000 Design: welding neck, slip on, blind, socket welding, threaded, lap-joint Pressure: 150#, 300#, 600#,900#,1500#, 2500# Wall thickness for welding neck flange: STD, SCH40, SCH80, SCH160. SCHXXS Material: carbon steel A105, stainless steel 304/304L, 316/316L......
Cangzhou Hangxin Flange Co.,Limited
|
Slip-On flange connector Copper and nickel flanges ASTM B466 UNS C70600 Size 10inch 150#-2500# Slip-On flange
|
Slip-On flange connector Copper and nickel flanges ASTM B466 UNS C70600 Size 10inch 150#-2500# Slip-On flange Product Name Copper-Nickel Threaded Flange With Various Specifications And Material Selection Size 1-1/4 Pressure Rate 150lb to 1500lb Manufacturing process Push, Press, Forge, Cast, etc. Material Stainless steel Stainless Steel flange ASTM A182 F304/304H/304L ASTM A182 F316/316H/316L......
TOBO INDUSTRIAL (SHANGHAI) CO., LTD
|
1/2" Pipe Asme B16.5 Slip On Flange Forging Plate Carbon Stainless Steel
|
..., XXS, SCH20,SCH30,SCH40, SCH60, SCH80, SCH160, XXS and etc. Material Stainless steel: A182F304/304L, A182 F316/316L, A182F321, A182F310S, A182F347H,...
Hebei Shengtian Pipe Fittings Group Co., Ltd.
|
1-1/2\" ANSI B16.5 Threaded Stainless Steel Slip on Flange 150LB 316L Raised Face TH RF Flange ANSI B16.5 Standard
|
1-1/2" ANSI B16.5 Threaded Stainless Steel Slip on Flange 150LB 316L Raised Face TH RF Flange ANSI B16.5 Standard 1. The carbon steel material provides high strength and durability, making it suitable for high-pressure and high-temperature ......
TOBO STEEL GROUP CHINA
|
DN80 ANSI B16.5 class 900 slip-on flanges
|
... DN80 ANSI B16.5 class 900 slip-on flanges Forged Flange - Size: DN10-DN600 - Class: PN0.6Mpa, PN1.0Mpa, PN2.5Mpa, PN4.0Mpa, etc. - Stainless steel flange, carbon steel flange and alloy steel flange Stainless steel flange: 304, 304L, 316, 316L, 316Ti,...
Hebei Lufeng Piping Equipment Co., Ltd.
|
Submit your “316l slip on flanges” inquiry in a minute :