Din Rail 35mm 25KA 3P 150V Power Surge Protection Device Lightning Surge Protector
|
...Rail 35mm High Quality 25KA 3P 150V Power Lightning Surge Protectors Din Rail 35mm 25KA 3P 150V Power Surge Protection Device Features: • Class B+C surge protector. • This DIN rail mounted surge protectors are easy to install in any standardized distribution pane or control cabinets. • It is equipped with a thermal disconnection device......
Britec Electric Co., Ltd.
|
Power surge protection device low voltage arrester surge protector 220v
|
...surge protection device can be produced on request Product Installation With 35mm standard DIN-rail mounting, connecting copper stranded conductor is 2.5~35mm² At front of spd each pole must be setted protection---used fuse or miniature circuit breaker lightning current SPD protection,after SPD breakdown to short circuit protection. SPD install on protected......
Zhejiang THOR Electric Co., Ltd
|
Metal 20ka 3 Phase Power Surge Protection Device 385V For Electronic Equipment
|
...Low-voltage Surge Protective Devices-Part 1: Surge Protective Devices Performance Requirements and Test Method of Low-voltage Power Distribution System. With good sealing, it is designed as module and 35mm din-rail mounting. With working indication window,...
Hunan Heou Engineering Consulting Co., Ltd
|
Voltage Limited 385V 2P Power Surge Protection Device
|
...Surge Protection Device Surge Protective Device Ac FSP-A series surge protection device (in short SPD,alias:surge suppressor surge arrester) is suitable for TN-S, TN-C-S, TT, IT etc,power supply system of AC 50/60Hz,<380V, installed on the joint of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1,GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device......
YUEQING FEEO ELECTRIC CO.,LTD
|
275VAC Power Surge Protection Device , Class 1 Surge Protection EN 61643-11
|
...Power Surge Protection Device, 275VAC Class I Surge Protector ,Type 1 SPD OBV10-I-15 Surge protectors OBV10-I-15 meet the type 1 requirement class according to IEC 61643-11. These devices protect low-voltage consumer systems from overvoltages of all types and are available in single-pole to four-pole versions.The voltage-limiting,high-performance spark gaps provide several benefits.A short response time, a low protection......
Guangdong Uchi Technology Co.,Ltd
|
IP20 Din Rail 80KA Surge Protection Device SPD Type 1+2
|
...rail 80KA Surge Protection device Type 1+2 with lightning protection class 3+4 Technical Parameters Model: Maximum continuous voltage AC Uc V 275/320/385/440 SPD to EN 61643-11 Type 1+2 SPD to IEC 61643-1 class I+II Lightning impulse current (10/350µs) Iimp kA 15-25 Nominal discharge current (8/20µs) In kA 40-80 Maximum discharge current (8/20µs) Imax kA 80-160 Voltage protection......
Guangdong Uchi Electronics Co.,Ltd
|
RS485 60kA Power Surge Protective Device SDZ60 For Power Supply Equipment
|
... line of system, and effectively protect power supply equipment from lightning strike. Characteristic: 1/ Impulse current reaches 10/350μs 60kA; 2/ Low voltage limitation; 3/ Nominal ......
Shendian Electric Co. Ltd
|
FD3 320/50 Power Surge Protective Device 320V 50KA Small Size
|
FD3 320/50 320V 50KA Power Surge Protector applied primarily to the main distribution system surge protection unit Operating Principle Edge discharge technique is used for this device. The electrode is in the shape of angle.Two electrodes are placed face......
XIAN XIWUER ELECTRONIC AND INFO. CO., LTD
|
Network Surge Protection Device Single Port 10/100/1000Mbps Din Rail
|
...Rail Network Surge Protection Device Technical Parameters Interface Form RJ45 Rated operating voltage Un 5V MAX Continuous running voltage Uc 8V Nominal discharge current In(8/20) 5KA Maximum discharge current Imax(8/20) 10KA limiting voltage Up 20V Network signal transmission rate Vs 10/100/1000Mbps self-adaption Network signal protection......
Shenzhen Qiutian Technology Co., Ltd
|
HKSPD1 Control And Protective Switching Device Surge Protection Device 1P
|
... installations. It is designed according to ICE61643-1 and GB18802.1 standards, installed on DIN rail EN 60715 (35mm) by means of fast clip device. It is built in with failure interrupter device, will automatically interrupt when breakdown fails due to...
Yueqing Vorax Electric CO.,LTD
|
Submit your “35mm rail power surge protection device” inquiry in a minute :