Building Material Smoke Density Test Apparatus , Vertical Flame Test Chamber Standard ASTM D2843
|
...road, so in the prevention of fires, smoke density of the test material is essential. Smoke Density Test Apparatus for Building Materials conforms to the national standard ISO5659-2 ASTM E662 BS 6401 GB/T 8323 specification and requirements, can be used to...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Needle Flame Tester IEC 60695 Flame Test Machine Testing Apparatus
|
...Flame Tester IEC 60695 Flame Test Machine Testing Apparatus Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Household Appliance 7 Inch Fire Hazard Needle-Flame Test Apparatus IEC 60695-11-5
|
... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,IEC60335-1, GB4706.1-2005, GB5169.5-2008 and etc.. It...
Guangzhou HongCe Equipment Co., Ltd.
|
PLC Control Needle Flame Test Chamber 4mm Coper Block
|
Flame Test Chamber Needle-Flame Test Apparatus PLC Control 4mm Coper Block Standard: IEC 60695-11-5 Fire hazard testing – Part 11 -5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance. Application: The Needle-Flame Test Apparatus to simulate the effect of a small flame......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC60695-11-5 Needle Flame Test Apparatus 95% Butane Gas For Ignition Hazard Test
|
...Flame Test Apparatus Electrical Safety Test Equipment 1. Introduction of Needle Flame Test Apparatus: ZY-2 Needle flame tester is designed according to IEC60695-11-5(IEC60695-2-2). It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame test to simulate the effect of a small flame......
Pego Electronics (Yi Chun) Company Limited
|
IEC 60695-11-5 Needle Flame Test Apparatus Fire Testing Equipment
|
...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument,...
Sinuo Testing Equipment Co. , Limited
|
IEC60695-11-5 Needle Flame Test Method Fire Hazard Testing Apparatus
|
...-11-5, it is required by many of standard requirements, such as IEC60335-1 clause 30.2.3.2, Annex E, etc. The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of...
Sinuo Testing Equipment Co. , Limited
|
Building Material Ignitability Test Apparatus-- Single-Flame Source Test
|
...Test Apparatus-- Single-Flame Source Test Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1. The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide. 45°-tilted burner is advanced horizontally until the flame......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber
|
Electronic Product Flame Test Apparatus , IEC 60695 Needle Flame Test Chamber Introductions Needle Flame Test Chamber is used to test the resistance of fire caused by an interior fault such as leakage current in cable & wire and the like. It meets the ......
SKYLINE INSTRUMENTS CO.,LTD
|
UL1685 Lab Testing Machine, Electrical and Optical-Fiber Cables Flame Test Apparatus
|
...Test Device Instrument Introduction: The UL 1685 Wire and Cable Flame Test Apparatus is an instrument used to evaluate the ability of a single or bundled cable to inhibit flame propagation under specified conditions, and meets the test requirements of UL 1685, IEEE 383 and IEEE 1202. The flame suppression performance of the cable is evaluated by igniting the specimen with a vertically placed flame......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
