SNMP ,4E1+4GE with Fiber 1+1, and 2RS232/422/485 PDH Fiber Optical Multiplexer
|
19inch 4E1 + 4GE PDH fiber optical multiplexer Product Description 4E1+4GE with Fiber 1+1, and 2RS232/422/485 PDH Multiplexer provides1-4ChannelE1 interface, master optical fiber interface and backup optical fiber interface,1-4Channel 10M/100M ......
Fibre Easy Communication Service Limited
|
4E1+4GE+Phone+SNMP Fiber Optical Multiplexer
|
4E1+4GE+Phone+SNMP Fiber Optical Multiplexer Advantages Ø Based on self -copyright IC Ø The Fiber bandwidth is up to 1.5G, Ethernet bandwidth is Wire Speed 1000M Ø Ethernet interface rate is 10/100/1000M, half/full duplex Auto-Nego Ø 4*Ethernet interface is switch interface, support VLAN, can set to 4 channel logical isolation Ø Provide Console manage interface (RS232) Ø Provide two fiber......
E-link China Technology Co.,LTD
|
Mux Demux CWDM Fiber Optic Multiplexing 8 Channel 1271nm~1611nm
|
... a number of optical carrier signals onto a single optical fiber by using different wavelengths (i.e., colors) of laser light. This technique enables bidirectional communications over a single strand of fiber, also called wavelength-division duplexing,...
KOCENT OPTEC LIMITED
|
CWDM Mux Demux Module Fiber Optical Multiplexer
|
...Fiber Optical Multiplexer CWDM mux demux Module description: HTD's Coarse wavelength division multiplexer (CWDM) utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical......
HTD Fibercom Co., Limited
|
8+1 Channel CWDM Mux Passive Optical CCWDM Module Single Fiber Optical Multiplexer SC/APC
|
... port. Compatct CWDM is the use of the Fiber Optical Multiplexer to different wavelengths of light signals multiplexed to a single optical fiber for transmission, at the receiving end of the link, with the Fiber Optical Multiplexer fiber mixed signal is...
TAKFLY COMMUNICATIONS CO., LTD.
|
1x8 CWDM Fiber Optical Multiplexer Demultiplexer System
|
...Fiber Optical Multiplexer Demultiplexer System The CWDM Fiber Optical Multiplexer and Demultiplexer System is combine and split the multi-wavelength optical signals over dual fiber. GEZHI's CWDM Fiber Optical Multiplexer Demultiplexer System let operators make full use of available fiber bandwidth in local loop and enterprise architectures. This CWDM Fiber Optical Multiplexer......
Gezhi Photonics (Shenzhen) Technology Co., Ltd.
|
High Performance CWDM Fiber Optic Multiplexer -40°C - 85°C Operating Temperature
|
...Fiber Optic Multiplexer -40°C - 85°C Operating Temperature Description Coarse Wavelength Division Multiplexing (CWDM) is the use of the Fiber Optical Multiplexer to different wavelengths of light signals multiplexed to a single optical fiber for transmission, at the receiving end of the link, with the Fiber Optical Multiplexer fiber......
Shenzhen HiLink Technology Co.,Ltd.
|
Rack Mount Wavelength Division Fiber Optic Multiplexer 1310 / 1550nm , High Channel Isolation
|
...Fiber Optic Multiplexer 1310 / 1550nm , High Channel Isolation Wavelength Division Multiplexer (WDM) is the device which uses multiple optical maser to transmit multi beam of different wavelengths of laser technology through a single fiber. Each signal is transmitted in its unique channel after the data (text, voice, video and so on) modulated. WDM can increase the existing fiber......
Shenzhen Fu Ou Ke Communication Equipment Co., Ltd
|
19 Inch 1U Fiber Optic Multiplexer 120Km Transmission Distance PDH Multiplexer
|
Fiber PDH Multiplexer 19" Rack 4 Channels 10/100/1000M Ethernet Switch Interface Ethernet Switch Interface Advantages ► Ethernet interface rate is 10M/100/1000M, half/full duplex auto- Negotiation ► 4 Channel Ethernet interface is switch interface, ......
E-link China Technology Co., Ltd.
|
16 Channel Compact Design CWDM Mux Demux Fiber Optical Multiplexer Module
|
...Fiber Optical Multiplexer Module Description: CWDM is using optical multiplexers to reuse different wavelengths of light into a single fiber to transmit signals. At the receiving end of the link, the mixed signal is decomposed into signals in the fiber by means of an optical......
Shenzhen Seacent Photonics Co.,Ltd.
|
