PLC Control Needle Flame Test Chamber 4mm Coper Block
|
Flame Test Chamber Needle-Flame Test Apparatus PLC Control 4mm Coper Block Standard: IEC 60695-11-5 Fire hazard testing – Part 11 -5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance. Application: The Needle-Flame Test Apparatus to simulate the effect of a small flame......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Plastic Burn Needle Flame Test Apparatus Electrical Industry , Chemistry Flame Test Chamber
|
... the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test time for the temperature of the standard copper block to increase from...
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
Glow wire test apparatus, glow wire tester without test chamber , IEC 60695-2-10 Glow Wire Tester ,
|
...test chamber , IEC 60695-2-10 Glow Wire Tester Introduction Glow wire test is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695-2-10,UL 746A .It makes required material(＞77%Ni/20±1%Cr) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test......
KingPo Technology Development Limited
|
Accessories For Flammability Test Chamber Gauges Electrodes Burners
|
Accessories for Flammability Test Chamber Gauge Thermocouple Burner Product overview: These accessories are for various of flammability test chambers, such as glow wire test apparatus, needle-flame test apparatus, tracking leakage test apparatus, ......
Sinuo Testing Equipment Co. , Limited
|
Touch Screen Glow Wire Flammability Testing Chamber Combustion Test Equipment
|
...,UL 746A ,GB/T5169.10,GB4706.1.It makes required material(Ni80/Cr20) and heating wire in required shape(Φ4mm-chromel-filament)heated up to test temperature( 550 ℃ ～ 960 ℃) for 1min and then broil the...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Temperature Meter Horizontal Flammability Tester , Adiabatic Flame Test Lab
|
Temperature Meter Horizontal Flammability Tester , Adiabatic Flame Test Lab Scope of application: It is applicable to the evaluation of the highest temperature of thermal insulation products such as insulating materials, felt, blankets, blocks, plates and ......
Dongguan HOOHA Electrical Equipment Company Limited
|
Gauges Copper Block Consumables for Flammability Testing Equipment
|
Consumables for Flammability Testing Equipment Complied Standards & Clauses The consumables are for various of flammability test chambers, such as glow wire test apparatus, needle-flame test apparatus, tracking leakage test apparatus, horizontal and ......
Sinuo Testing Equipment Co. , Limited
|
Building Materials Smoke Density Chamber Tester by ASTM D2843
|
Introduction: The smoke density tester for building materials was developed by Rohm and Haas Company for internal control. It was developed in accordance with the ASTM D2843 standard in the 1970s. Its theoretical basis is the adoption of Bill Lumber's law......
Advanced Instruments Co.,Limited
|
SMT DEK Spare Parts 457mm Griod Lok 192731 Original New Condition Long Lifespan
|
...Tested Brand Name: Dek Type: SMT machine parts Condition: Original new We also supply following Dek Spare parts : 161081 BLOCK, VORTEX PIVOT 161080 BRACKET, VORTEX PIVOT 161022 ADJUSTER STOP 161003 VACUUM CHAMBER, VORTEX USC 161002 MOUNTING TRAY, VORTEX USC 157614 SOLVENT SOLENOID BOM 156699 FITTING, 4mm...
Qinyi Electronics Co.,Ltd QYSMT
|