5N Excitation Force Tester For Safety Mechanism Self Destruct Syringe
|
...select the spring specification, display it in real time, and print the record chart of each force value. It fully complies with YY 0573.4-2010. The range of force is 0.5n-12n, and the error is not more than ± 0.2N; Test rate: 100 mm / min, ± 5 mm / min;...
shanghai kerang technology co ltd
|
Manual Telephone Keystroke Tester Pull Force Tester With 5N - 20N Capacity
|
...Tester Pull Force Tester With 5N - 20N Capacity Model: RS-6900C Purpose: 1. Keys of computer 2. keypads of mobile phone 3. Keypads of Calculator, telephone, remote control 4. Conducting rubber buttons 5. Metal, spring buttons 6. Buttons for the other electronic products 7. And all kinds of touch switch Application: Can display the FP,FC,FM,FR, Rate of clicking, and the force value after testing. This tester......
Infinity Machine International Inc.
|
Medical Needle Penetration Force Tester with 100mm/min Moving Speed
|
... 8034-HD Nominal specification 0.18-3.4mm Test range 0-5N Resolution 0.001N Moving speed 100mm/min Power off storage Available Power supply AC220/50Hz(Can be customized) Sensor High precision force sensor (with software and hardware protection functions)...
Hai Da Labtester
|
USB Data Storage Medical Needle Penetration Force Tester 100mm/min Moving Speed
|
... 8034-HD Nominal specification 0.18-3.4mm Test range 0-5N Resolution 0.001N Moving speed 100mm/min Power off storage Available Power supply AC220/50Hz(Can be customized) Sensor High precision force sensor (with software and hardware protection functions)...
Dongguan Haida Equipment Co.,LTD
|
IEC60884-1 0-250mm Balance Arm 2.5N Plug Socket Tester Torque Test Device
|
... requirements' clause 14.23.2 Standard description with Plug Socket Tester: The plug socket tester torque test device is inserted into a fixed socket-outlet complying with this standard, the socket-outlet is pivoted about a horizontal axis through the...
Guangzhou HongCe Equipment Co., Ltd.
|
2.5N,5N DIN Abrasion Tester To Test Abrasion Resistance Of Rubber And Leather
|
2.5N,5N DIN Abrasion Tester To Test Abrasion Resistance Of Rubber And Leather Product Information DIN abrasive tester is to test the surface friction of a particular sandpaper, and then to evaluate the surface condition, weight, volume and thickness of ......
Haida Equipment Co., Ltd
|
Governor Switch SN-BE-1375 Durable Elevator Spare Parts With Le 3.5N Operating Force
|
...5N Operating Force Products Detail:SN-BE-1375BT Features Item No. SN-BE1375BT1 SN-BE1375BT2 Voltage 220V 24V Contact Structure 1NC 1NC Operating Force ≤2N ≤2N Operating Angle ≤20° ≤20° Travel 5±1mm 5±1mm Reset Mode Electromagnet Reset Electromagnet Reset Products Detail:SN-BE-1375 Features Item No. SN-BE1375B SN-BE1375C Contact Structure 1NC 1NC+1NO Operating Force ≤3.5N ≤3.5N...
SHANGHAI SUNNY ELEVATOR CO.,LTD
|
Cartesykj Vehicle Inspection Equipment Roller Brake Tester 4T Roller Brake Opposite Force Tester With Axle Load Brake Testing
|
...force tester Roller Brake tester with axle load brake testing Product Introduction: Its main for the brake performance testing. The roller brake tester can detect and calculation the each axis (left and right wheels) block force of car, brake force and the deviation of brake force (process deviation, and maximum deviation), as well as the ratio of brake force......
Cartesy Diagnosis Technology CO.,Ltd
|
Unwind Adhesion Peel Strength Tester / High Speed Pressure Sensitive Tape Unwind Force Tester
|
... Usage : At the condition high speed to peeled off entire roll adhesive tape, Adhesive Unwind Peeling Strength Tester is to observed the strength change and analysis size of peel force during entire roll adhesive tape stripping process, as adhesive tape at...
Perfect International Instruments Co., Ltd
|
RS-PT301 Manual Needel Type Push Pull Force Tester
|
...Force Pull Tester Manual Type Usage: This crimp force pull tester is for measuring pull force after crimp connection, and weld connections. It is manual type with needel type pull tester. Simple and Cost-effective. And there are different pull force selection from 5KG 10KG 20KG 30KG 40KG 50KG. Model: RS-PT301 Manual Type Pull Tester With Needel Type Pull Tester Pull tester......
RKENS TECHNOLOGY CO.,LTD
|