300mm/min Speed 2.5KG 2PH AC220V Manual Type Peel Bond Strength Tester Rolling Rubber Layer
|
.../min Speed 2.5KG 2PH AC220V Manual Type Peel Bond Strength Tester Rolling Rubber Layer Uses: Peel Adhesion Test Equipment is used for the ready materials of testing peeling strength and tape retentiveness. By steady presure and speed sticking the adhesive......
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Shoe Peel Adhesion Test Equipment , Industrial Peel Bond Strength Tester
|
Shoe peeling strength testing machine/equipment (GW-034B) •Brief introduction: This machine is used to test the bonding strength of the toe caps. Inspection on the soles and uppers, with steady increase of separation forces make soles and uppers separation......
Dongguan Guo Feng Testing Machine Co., Ltd.
|
Universal Materials Tester 90 Degree Adhesive Bond Tearing Strength Tester Peel Force Tensile Testing Equipment
|
... bending test, tensile test, peeling test, bond strength test and so on. Tensile strength testing machine is mainly applied to test non-metallic materials in tension, compression, bending, shear, peel, tear or two-points extensions and others., such...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
90 Degree Peel Tester Machine Computerised Rubber Tape Adhesive Strength Test 10N 20N 50N 100N 200N 500N
|
90 Degree Peel Tester Machine Computerised Rubber Tape Adhesive Strength Test Model: RS-8107A Application: This test applies for the adhesion capability of copper foil on PC board or the adhesion capability of tin foil & al. foil and adhesive tape. Peel the specimen by 90° angle, check the actual strength, with micro-controller and peeling stroke is available.. Typical applications: Rubber tape peeling test at 90......
Infinity Machine International Inc.
|
90 Degrees Stripping Force Strength Testing Equipment for rubber
|
90 Degrees Stripping Force Strength Testing Machine Product introduction: 90 degrees Film Stripping Force Tester is used to test the adhesion of copper foil circuit on PCB or test the surface adhesion of foil, aluminum foil, tape and other products. Using 90 degrees angle peel the materials to test actual peeling strength, it is the basic tester for quality management and physical property. ZL-3041 90 degrees stripping tester......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Adhesive Tape Strength 90 Degree Peeling Testing Machine
|
... foil, rubber cloth...The actual stripping strength of 90 degrees can be measured by stripping the specimen at a vertical Angle. Specification: Product name 90 Degrees Peeling Strength Tester for Adhesive Tape and Circuit Board Capacity 3, 5, 10, 20, 30,...
Guangdong Aisry Instrument Technology Co., Ltd.
|
90 Degree Peel Strength Tester To Test Adhesion Of Copper Foil Circuit On PC Board
|
...tin foil, lead foil, tape, etc., and adhere to the surface fastness of the object. The test piece is peeled at a vertical angle during the test. The actual 90 degree peel strength can be measured, and a high-precision number push-pull force table can be...
DongGuan Q1-Test Equipment Co., Ltd.
|
TAPPI-T569pm Internal Bonding Strength Tester Internal Plybond Test Machine for Cardboard
|
...Bonding Strength Tester Internal Plybond Test Machine 1. Use Intensity of interlayer combination (combination) refers to the ability of cardboard plies to resist separation, which is a reflection of the paper bonding ability. Interlayer peel strength can be accurately measured with an internal bond strength tester, interlayer peel strength tester, internal bond strength tester, internal bond strength......
DONGGUAN LONROY EQUIPMENT CO LTD
|
90 Degree Peel Strength Tester 10N 20N 50N 1 Grade 0.5 Grade Accuracy
|
1grade/0.5 grade 90 Degree Peel Strength Tester Hz-1007e Peel Strength Tester Equipment summary: It is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of ......
Dongguan Lixian Instrument Scientific Co.,LTD
|
Interlayer Bonding Strength Tester for Testing the Tensile Strength of Paper and Paperboard
|
...Bonding Strength Tester Use The interlaminar bond strength tester is a special test instrument for testing the tensile strength (ie, the internal bond strength or the interlaminar bond strength) of paper and paperboard. Test principle The energy absorbed by the test piece of the test paper after being impacted by a certain angle and weight, and showing the strength of peeling......
SKYLINE INSTRUMENTS CO.,LTD
|
Submit your “90 degree peel bond strength tester” inquiry in a minute :