A2L, IEC 60335-2-40 Annex KK Test Equipment for hot surface ignition temperature
|
Test method for hot surface ignition temperature for A2L, IEC 60335-2-40 Annex KK KK.1 General The hot surface ignition temperature of A2L refrigerants shall be determined according to Annex KK. The refrigerants shall be sprayed onto a horizontal flat plate surface which is set at the test temperature. The test system consists of a hot plate, a spray tube and a chimney. Figure KK.1 , Figure KK.2 and Figure KK.3 display the set-up of the test...
KingPo Technology Development Limited
|
IEC60695-2-20 Hot Wire Ignition Test Apparatus , Fire Hazard Testing Equipment
|
...Hot Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire of a specific size (Φ0.5 mm* 250 mm) and a specific material (Ni80/Cr20), after pre-annealing with specified heating power (0.26W/mm) and the specified time (8s~12s), the hot...
Pego Electronics (Yi Chun) Company Limited
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot Wire Ignition Tester 5.28Ω/M
|
IEC 60695-2-20 Hot Wire Ignition Test Apparatus Hot wire ignition tester Application: It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of ......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Lab Testing Equipment Fire Hazard Evaluation / Hot Wire Ignition Test Machine Ni80/Cr20 IEC60695-2-20
|
Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-......
Hai Da Labtester
|
IEC60695-2-20 Hot Wire Ignition Tester Flammability Testing Equipment
|
...Testing Equipment Hot wire ignition tester With Electrical control Standard: IEC60950-1 Information technology equipment – Safety – Part 1: General requirements Annex A.4 Hot wire ignition test; IEC60947-1 Low-voltage switchgear and controlgear –Part 1: General rules Annex M M.1 Hot wire ignition test (HWI); IEC60695-2-20 Fire hazard testing — Part 2: Glowing/Hot wire based test methods — Section 20: Hot......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60695-2-20 Ignition Test Chamber For Hot Wire Coil
|
Product introduction The hot wire ignition test chamber is designed according to IEC 60695-2-20 and GB 4943 standards and conforms to the standard hot wire ignition test method. This hot wire ignition test chamber is mainly used for testing the hot wire ......
Advanced Instruments Co.,Limited
|
IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester
|
...Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time. Hot-wire coil ignition test...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester
|
...Test Equipment HWI Hot Ignition Wire Tester IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment Product information: This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition...
Dongguan Kingpo Technology Limited
|
IEC 60695-2-20 Hot Wire Ignition Coil Flammability Testing Equipment
|
...Hot Wire Ignition Coil Test Method Apparatus Complied Standards & Clauses IEC60695-2-20 “Fire hazard testing - Part 2: Glowing/Hot wire based test methods - Section 20: Hot-wire coil ignitability test on materials” Equipment Overview Application: Suitable for fire hazard tests on solid electrical insulating materias of information technology equipment, low-voltage switchgear and control equipment......
Sinuo Testing Equipment Co. , Limited
|
ASTM D1929 Ignition Temperature Of Plastics Testing Equipment ISO 871 In Laboratory
|
... ignition temperature and spontaneous ignition temperature of plastics using a hot-air furnace. Standards: - ISO 871 - ASTM D 1929 - GB/T 4610 - GB/T 9343 Specification: Temperature of copper furnace: - Can be constant between 150~450 ℃ ; - Equipped with...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “a2l hot surface ignition test equipment” inquiry in a minute :