Aluminium Thick Iron High Speed Steel Twist Alloy Drill Bit 180 Degree
|
TWKit-3 25pcs 1-13mm Cobalt High-speed Steel Din388 Twist Drill Bit 25pcs in one set, diameters are: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 7.5mm, 8mm, 8.5mm, 9mm, 9.5mm, 10mm, 10.5mm 11mm, 11.5mm, 12mm, 12.5mm, 13mm ......
Beijing Deyi Diamond Products Co., Ltd.
|
Parking Lot Barrier Gate Alunimum Alloy Folding Arm 180 Degree
|
Parking Lot Barrier Gate Accessories Alunimum Alloy Folding Arm 180 Degree Specification: Meterial: aluminium alloy, 1.2mm thickness Size: 45*80mm: with arm auto reverse and swing out function, can not add LED light and rubber 45*100mm: with arm auto ......
Shenzhen Wonsun Machinery & Electrical Technology Co. Ltd
|
HSS4341 Twist Drill Bit , Roll Forged Half Ground Tin Coated hss Drill Bits
|
...Drill Bit , Roll Forged Half Ground Tin Coated Titanium Drill Bits STARRY Drill bit can drilling holes on aluminium,plastic,wood,copper,iron. Produced by hot roll-forged technology. The high twisting moment and elasticity enable using by hand drilling devices and conventional machinery for low alloyed steel, cast, ferrous and non-ferrous metals. DIN338 HSS-4241 Roll Forged Twist Drill Bits Type: HSS twist drill bit......
Jiangsu Xingrui Tools CO.,LTD
|
DIN338 HSS Drill Bits 1-13mm Straight Shank 118 Degree Point
|
DIN338 Straight Shank HSS Drill Bits for Metal with Bright Finished Polished Quick Details of DIN338 Drill Bits: 1. Material:HSS 4241,4341,6542; 2. Process:Polished 3. Surface:Bright Finished 4. Point:118° 5. Shank:Straight Shank 6. Drilling holes on ......
DANYANG RIGHTOOLS CO.,LTD
|
HSS4341 Twist Drill Bit , Roll Forged Half Ground Tin Coated Titanium Drill Bits
|
.... The high twisting moment and elasticity enable using by hand drilling devices and conventional machinery for low alloyed steel, cast, ferrous and non-ferrous metals. 1. Detail: DIN338 HSS-4241 Roll Forged Twist Drill Bits Type: HSS twist drill bit Shank:...
Jiangsu Xingrui Tools CO.,LTD
|
90 Degree Carbide End Mill Countersink Chamfer Drill Bits Center Spotting Titanium Cobalt
|
...,positioning and chamfering completed at the same time. Be suitable for: Stainless Steel, Alloy Steel, Hardened And Tempered Steel, cast iron, aluminium alloy, Spring steel. Specifications: Coating:Titanium Edge angle: 90 degrees Type(Diameter*Length:)...
Supal (Changzhou) Precision Tools Co.,Ltd
|
Diameter 14mm HSS Twist Drill Bit For 38HRC Metal
|
...drilling process, for drilling stainless steel, heat resistant steel(refractory steel), alloy, cast iron, and the difficult-to-cut metals of which hardness is between 32 to 38HRC. The standard size can be available from stock. Size list: d(h8) L L1 d(h8) L...
Xiamen Betalent Carbide Co.,Ltd
|
Din338 Left Hand Metal Drilling Bit Titanium Hss Twist
|
...Drill Bit For Metal DIN338 Titanium Coated HSS Twist Drill Bits are widely used for stainless steel, iron, aluminum alloy, wood, plastic hole drilling. High speed steel raw materials make it cut sharply and has a long service life. The standard reverse hss drill bits have fully ground body construction. High flow spiral design for the fastest removal speed and for thick......
Zhongzuan (Chongqing ) Precision Tools Manufacturing Co., Ltd.
|
HSS with Co Twist Drill Bit for Stainless Steel Machining
|
...Drill Bit Materials: HSS with CO (M35) Size: 1mm-13mm Shank: Straight Processing Materials: Stainless Steel, Steel, Alloy Steel, Cast Iron, Aluminium Alloy Twist drill with CO, belong to high cobalt M35 material, has the properties of temperature resistance, good wear resistance, the surface of titanium alloy......
Xiangtan Eagle Trade Co. Ltd
|
Thick 1.7mm Aluminium Pipe Joints 180 Degree Freedom Connector Outer Diameter 28mm
|
180 degree freedom connector outer diameter 28mm thick 1.7mm aluminum pipe / aluminum alloy lean pipe joint Quick Detail: 1. Material: aluminum alloy (aluminum + ADC-12) 2. Technology: die casting 3. Type: Cross aluinum pipe connector. 4. Attended mode: ......
Shenzhen Jingji Technology Co., Ltd.
|
Submit your “aluminium thick iron alloy drill bit 180 degree” inquiry in a minute :