IEC60695-11-5 Flammability Tester Needle Flame Tester
![]() |
....5-2008,GB4706.1-2005 ,etc. Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen ignite ,lasting ignition time and...
KingPo Technology Development Limited
|
Flame Application Angle 0~45° Needle Flame Tester For Flammability Testing Equipment
![]() |
... to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is...
Guangzhou HongCe Equipment Co., Ltd.
|
NFT Needle Flame Tester for Insulating Material Flame Testing
![]() |
...Needle Flame Tester ---- Model NFT Introduction: NFT Needle Flame Tester uses a Φ0.9mm needle burner, use butane as gas source, burn the specimen at 45 ° angle. Then according to the specimen is ignited and burned time and burning length to evaluate the fire hazard of the small flames caused by the fault condition inside the equipment. NFT Needle Flame Tester......
Delta Technology (Chongqing) Co., Ltd.
|
Touch Screen Flammability Testing Equipment / Needle Flame Tester IEC60695-11-5 IEC60695-2-2
![]() |
... the current advanced embedded computer control, to achieve full intelligent control. The needle flame test is to use a needle burner of the specified size (Φ0.9mm), with a specific gas (butane or propane), and the sample is fired at a 45° angle. The...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC60695-2-2 Standard Needle Flame Tester
![]() |
Needle Flame Tester Electrical Instrument Test Equipment with 35mm length Burner and Black Background 1. Standard of Needle Flame Tester ZY-2 Needle flame tester is designed according to IEC60695-11-5 and IEC60695-2-2 standard. 2. Application of Needle Flame Tester It is applicable to ignition hazard test, combustibility test of electronic industry and home electronic appliance. The equipment specifies a needle-flame......
Pego Electronics (Yi Chun) Company Limited
|
Needle Flame Tester C60695-1-5 Standard Flame Height 12±1mm Flammability Testing Equipment
![]() |
Needle Flame Tester C60695-1-5 Standard Flame Height 12±1mm Flammability Testing Equipment Product Introduction NF-2 Needle Flame Tester is a professional Flammability Testing Equipment. This equipment is dedicated to accurately testing the flammability of products. By simulating the needle flame......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Φ0.9mm Φ0.5mm Needle Flame Tester IEC Table Type By Small Flame
![]() |
... Needle Flame Tester IEC Table Type By Small Flame IEC60695-11-5 Table Type Needle Flame Tester For Assessing The Internal Fault Conditions Caused By Small Flame Product Description According to IEC60695-2-2 and IEC60695-11-5 Needle Flame Tester is applied......
Dongguan Kingpo Technology Limited
|
Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1
![]() |
Needle Flame Tester Electronic Steel Testing For Fire Hazard Measurement IEC 62368-1 Product information: The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of the equipment when there is flammule inside the equipment that caused due to the fault condition is assessed by whether the specimen can be ignited or the combustion time and length. This tester...
Sinuo Testing Equipment Co. , Limited
|
Electrical Control Needle Flame Tester IEC60695 11 5 Button Operation
![]() |
... to simulate the effect of a samll flame which may result from fault condition, in order to assess by a simulation technique the fire hazard. Test sample:Lighting, low-voltage electrical ......
shanghai kerang technology co ltd
|
Needle flame tester for testing the flame retardant performance of electronic components
![]() |
... products. This machine simulates the small flame generated inside the product under fault conditions, and uses simulation technology to evaluate the fire hazard. Needle height: more than 35mm (inner diameter 0.5, outer diameter 0.9); The gas volume can be...
Dongguan Chengfeng Testing Equipment Co., Ltd
|