A333 ASTM Gr.1 Low Finned Tube Low Temperature Carbon Steel Alloy For Heat Exchanger
|
ASTM A333 Gr.1 Low Finned Tube Low Temperature Carbon Steel Alloy For Heat Exchanger An ASTM A333 Gr.1 Low Finned Tube is a type of heat exchanger tube made from ASTM A333 Grade 1 material, which is a low-temperature carbon steel alloy. The "low finned" design refers to the external surface of the tube, which has fins (protrusions) to enhance heat transfer efficiency. These fins increase the surface area of the tube......
YUHONG HOLDING GROUP CO., LTD
|
ASTM A333 Gr1 Low Temperature Welded Steel Pipe For Low Temperature Service
|
... pipes designed for low-temperature service. This specification covers several grades of steel, each with specific chemical and mechanical properties tailored to withstand low temperatures. The grades covered under this specification include Gr1, Gr3, Gr4,...
TORICH INTERNATIONAL LIMITED
|
ASTM B111 C12200 Low Fin Tube For Heat Exchanger Condenser Tube Bundle
|
.... Made from phosphorus-deoxidized copper, this tube offers excellent thermal and electrical conductivity. Low Fin Design increases surface area without significantly adding to the volume, improving heat transfer efficiency. It has good resistance to...
YUHONG HOLDING GROUP CO., LTD
|
ASTM B111 C70600 Low Fin Tube Copper Nickel Alloy For Heat Exchanger
|
... tubes, the low fins offer the advantage that the outer surface of the metal tube is increased. This is reflected in the fact that the heat exchanger has a higher capacity than models with bare tubes.The low finned tubes have an extended surface on the...
Yuhong Group Co.,Ltd
|
A333 Gr.1 Carbon Steel Alloy Low Temperature Low Finned Tube For Enhanced Heat Transfer In Petrochemical Plants
|
ASTM A333 Gr.1 Low Finned Tube - Low Temperature Carbon Steel Alloy For Heat Exchanger Product Specifications Attribute Value Product Name Low Temperature Carbon Steel Alloy Low Finned Tube Bare Tube Specification & Material ASTM A333 GR.1 Bare Tube OD 10~38mm Bare Tube Length Custom sized Fin Height <1.6mm Fin Thickness ~0.3mm Fin......
YUHONG HOLDING GROUP CO., LTD
|
Extrusion Corrugated Seamless B111 C12200 Spiral Copper Low Fin Tube For Heat Exchanger
|
...fin tube Titanium welded pipe / tubing ASTM B338, ASTM B862 Gr1 GR2 GR7 GR12 OD (10.3~914) = (1/8~36)Inch WT (0.5~30.96) = (0.049~1.219) Inch Length Titanium seamless pipe / tubing ASTM B338, ASTM B337, ASTM B861 GR1 GR2 GR3 GR5 GR6 GR7 GR9 GR12 GR16 GR17 etc. OD (1.5~420) WT(0.3~16 ) Length 18000 mm Quick Detail: General Low Fin Tubes Production Capacity Specifications of Low...
JIANGSU RELIANCE THERMAL EQUIPMENT CO., LTD
|
Heat Exchangers ASTM A333 Gr.ⅠLow Temperature Steel Pipe
|
... for low temperature, which's conditions of - 45-195, including low-temperature pressure vessels, low-temperature pressure pipes, low-temperature heat exchangers, etc. There are 11 grade levels of materials in this standard. Now we mainly make GR1 and...
SUZHOU FRANK STEEL CO.,LTD.
|
DELLOK C70600 Low Fin Tube
|
... B111: Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock Description: The fin is rolled out from the outer wall of the smooth tube with a pass roller. The tube and fin are in the same tube. We call it the "n" fin. It has many uses such as...
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd.
|
33.4X4.55 88.9X7.62 219.1X8.18 ASTM A333 Gr6 low temperature seamless steel tubes
|
...ASTM A333 Gr6 low temperature seamless steel tubes 1.Torich A333 Gr6 is a nickel-free low-temperature steel pipe, Gr6 low temperature seamless tubes is a fine-grained low- temperature toughness steel with aluminum deoxidation, and its metallographic structure is body-centered cubic ferrite. Bolier tubes with Gr6 usually delivered in normalized or normalized and tempered state. Low......
Torich International Limited
|
ASTM A423 Gr1 Alloy Steel Tube Hot Rolled Low Alloy Steel Tubes For Heat Exchanger
|
... steel tubes for heat exchangers. These tubes are made from hot-rolled steel and are specifically designed to meet the requirements of heat transfer applications. The tubes are intended for use in both high-pressure and high-temperature environments. The...
TORICH INTERNATIONAL LIMITED
|
Submit your “astm a333 gr1 low fin tubes” inquiry in a minute :