A335 P9 ASTM Studded Fin Tube For Fired Heater Steam Boiler
|
ASTM A335 P9 Studded Fin Tube For Fired Heater,Steam Boiler ASTM A335 GR.P9 Studded Fin Tube are made from high-alloy steel and are designed for high-temperature and high-pressure applications.ASTM A335 G.P9 Studded Fin Tube maintain excellent strength......
YUHONG HOLDING GROUP CO., LTD
|
ASTM Extruded Fin Tube
|
ASTM Extruded Fin Tube OD1.5'' , A192 seamless boiler tube , extruded aluminum air cooler fin tube ASTM A192 / A192M : Seamless Carbon Steel Boiler Tubes for High-Pressure Service ASTM A210 / A210M : Seamless Medium-Carbon Steel Boiler and Superheater Tubes ASTM A179 / A179M : Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes Tube......
Dellok Yonghui Radiating Pipe Manufacturing Co.,Ltd.
|
ASTM A335 Steel Tubes with Ferritic and Alloy steel pipe for high temperature service
|
ASTM A335 Seamless ferritic and alloy steel pipe for high temperature service Key words: ASTM A335 P91 A335 P22 material composition A335 P22 Pipe P9 Chemical composition Alloy steel pipe, High temperature service,Seamless steel pipe,Steel ......
Torich International Limited
|
ASTM A335 Steel Tubing Seamless Ferritic Alloy Steel Pipe For High Temperature Service
|
ASTM A335 High Strength Steel Tubing: Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service Tube Introduction ASTM A335 is a specification standard for seamless ferritic alloy-steel pipe intended for high-temperature service. This specification covers several grades of high-strength steel tubing......
TORICH INTERNATIONAL LIMITED
|
ASTM H Fin Tube Seamless Fin Pipe For Heat Exchanger Fin Tube Boiler
|
...fin Tube What is copper fin tube boiler? Copper-Fin boilers are equipped with a built-in draft hood, a highly efficient copper tube heat exchanger, our own specially designed two-stage electronic control system, and they are approved for installation on combustible floors. Models are available with inputs from 315,000 to 500,000 Btu/hr. What is the purpose of the fins on finned tube coils? The fins......
Jiangsu Sat-Cham Energy Technology Co., Ltd.
|
Tested 6 " ASTM U Fin Tube For Thermal Power Plant High Radius Tolerance
|
...ASTM A/SA268 TP410 Seamless U Fin Tube Stainless Steel for Heat Exchanger U Bend Tube OD in mm can be bent upon agreement: 15.8 16.0 17.0 18.0 19.05 20.0 21.3 25.4 26.7 31.8 32.0 38.1mm U bend Tube Initial Length Maximum lengths of 27000mm can be supplied on request U bend Pipe Bending radius Minimum: 1.5×OD Maximum: 1500 mm Stainless Steel Tubes......
TOBO STEEL GROUP CHINA
|
ASTM A335 P11 HFW Serrated Finned Tube With Gr.11 Fins For Power Plants
|
... is a type of heat exchanger tube that is made of ASTM A335 P11 alloy steel with serrated fins made of Grade 11 alloy material. The serrated fins provide increased heat transfer efficiency by increasing the contact surface area between the fluid inside the...
YUHONG HOLDING GROUP CO., LTD
|
ASTM A335 P11 HFW Serrated Helical Finned Tube for Petrochemical
|
... is a type of heat exchanger tube that is made of ASTM A335 P11 alloy steel with serrated fins made of Grade 11 alloy material. The serrated fins provide increased heat transfer efficiency by increasing the contact surface area between the fluid inside the...
YUHONG HOLDING GROUP CO., LTD
|
ASTM A335 GR.P9 Alloy Steel Finned Tube For Heat Exchanger
|
ASTM A335 GR.P9 Alloy Steel Finned Tube For Heat Exchanger The ASTM A335 GR.P9 Alloy Steel Finned Tube is a high-performance heat exchanger component designed for demanding applications in industries such as power generation, petrochemical, oil & gas, and chemical processing. It combines the strength and heat resistance of ASTM A335 Grade P9 alloy steel with the enhanced surface area provided by finned tube......
Yuhong Group Co.,Ltd
|
OD 4'' X SCH80 Welded Serrated Fin tube , SA335 P11 / P22 / P91
|
... Detail: High Frequency Resistance Welded Helical Steel Fin Tubes is widely used in the recovery of waste heat from boiler flue gas. General HF welding production capacity General specifications of HF welding fin tube Welding Facility: 4 finning machines;...
JIANGSU RELIANCE THERMAL EQUIPMENT CO., LTD
|
