Non Woven White Color Bicomponent Polyester Fiber Side By Side 2D×38mm
|
...Bicomponent Ethylene Propylene Side By Side Fiber 2D×38mm 2D*38MM Bicomponent Polyester Fiber Ethylene ES fiber (Propylene Side By Side) 1. Introduction ES fiber, short for "ethylene propylene side by side" fiber, is a type of polyolefin fiber composed of a low melting point bi-component composite. This fiber......
Suzhou Makeit Technology Co.,Ltd.
|
White Staple Fiber 6mmx1.66dtex Short Cut Corn PLA Fiber For Petroleum Drilling
|
... biodegradability, PLA fiber can be completely decomposed into CO2 and H2O in nature after going out of use. Our PLA staple fibers are produced by high quality PLA section to replace the polyester fiber and the cotton fiber and are usually applied for the...
Briture Co., Ltd.
|
Special PLA Fiber Non Woven Spunlace for Non Woven Medical Products
|
...PLA Fiber Non Woven Spunlace for Non Woven Medical Products Specifications 1) High-grade sanitary napkin, pad, diaper surface layer; 2) Facial mask; 3) Wet wipes, cleaning cloth, medical dressing PLA fiber spunlace nonwoven fabric Features: Renewable source, compostable completely Weak acid, fit for people's skin Does not support microbial growth like natural fibers......
Shanghai Baige New Material CO.,LTD
|
Water Absorbent Ethylene Propylene Polyester Staple Fiber White Bicomponent Fiber
|
... points, and it can be formed into a nonwoven fabric without using any kind of adhesives, only heat treatment utilize the difference of melting points. Lately, ES fiber (Ethylene Propylene Side By Side Fiber) has become...
Guangzhou Octopus Fiber Co.,Ltd.
|
1.2D High-Quality Antibacterial Anti-Bacterial PP/PE Bicomponent Es Polyester Staple Fiber
|
...PE Bicomponent Es Polyester Staple Fiber Description: ES fiber is produced by composite spinning technology with sheath-core structure, sheath is PE, and core is PET or PP. During heat processing, sheath components are melted and adhered to stick fiber tog......
Wuxi Xilan New Material Technology Co., Ltd.
|
Bicomponent ES Non Woven Fabric Good Elasticity White Color For Medical Uniform
|
... high melting point and high strength in the core layer, After heat treatment,the fibers are pqrtially fused,and the rest still retain the fiber state and have tha characteristics of small thermal shrinkage. Quick details: Material: ES Color: White Weight:...
Dong Guan Hendar Cloth Co., Ltd
|
6D Low Melt Fiber Good Bonding Recycled Polyester Fiber For Bedding
|
...Fiber Spinning 1. Product Introduction Low melt polyester staple fiber is made by bicomponent spinning of general polyester and modified polyester, can be melted at lower temperature (110~200℃) than normal fiber and bonded with other fibers. It has a good bonding properties and can mix with normal fiber to form the nonwoven, then heat to bond them together and become an elastomer. 2. Product Features Material Co-PET/PET Fiber......
Guangzhou Rontex Nonwoven Technology Co. , Ltd.
|
Sea Island Micro Denier Reliance Polyester Fiber 3d X 51mm For Suede Fabric
|
...fiber in 3dx51mm for suede fabrics Sea-island micro fiber if made of nylon/co-polyester bicomponent polyester. The Co-polyester part will be dissolved after alkaline treatment, and there are 37 islands in the sea. The sea island micro fiber cross section as below: Fiber Finess 3.5D Fiber Length 51MM fiber denier after treatment 0.06dtex (super fine denier of fibers......
Shanghai Arecotex Co., Ltd.
|
Padding Stuffing Virgin Polyester Staple Fiber 15Dtex High Resilience
|
... technology of heterogeneous polyester The fiber will meet all needed requirements for high quality nonwoven and stuffing usage. It has a bulky property, high resilience and light weight which is generated through three ......
SUZHOU HENGHAO IMPORT & EXPORT CO.LTD
|
1.0mm Molded Fiber Packaging Colored PLA Laminated Pulp Tray
|
.... This process produces high quality thin-walled items(from 0.6~1.3mm), with good dimensional accuracy, and smooth, rigid surfaces. This solution forms a PLA on the surafces of molded fiber tray, which can avoid fiber dust caused by...
Winner Pulp Holdings Limited
|
Submit your “bicomponent pla fiber” inquiry in a minute :