N Type Male Coaxial RF Termination Load – 1W Power Rating
|
... line, making it ideal as an energy-absorbing component in high-frequency systems. Widely used for precision testing and measurement of microwave devices, RF systems, and indoor distributed terminals....
Xi'an Sipu RF Technology Co., Ltd.
|
2 Watt Rf Termination Load , Coaxial Dummy Load DC-3GHz Connector 50 OHM Impedance
|
...rf dummy load Termination Load (DC-3GHz) connector Specification Temperature range -40~+85°C Vibration 100m/s2 (10~500Hz) Impedance 50 OHM Frequency Range DC – 11GHz Working Voltage 2700V max Break-down Voltage 4000V rms @ sea level Contact resistance ≤0.4 OHM @ inner contact ≤1.5 OHM @ outer contact Average power 3KW max Insulation resistance ≥10000M OHM VSWR ≤ 1.10 Durability (mating) ≥500 (cycles) Body Brass......
SHENZHEN ZD TECH CO., LTD
|
Alum N Male 450~2600MHz Rf Termination Load
|
... radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to...
HeFei Vinncom Science And Technology Co.,LTD
|
600-4000MHz RF Termination Load Dummy Load or Terminator or RF Load Low Pim Load 5W
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Input Power(W) 5 10 30 50 RF ......
Anhui Bonfire Technology Co., Ltd
|
Female SMT Type IPX High Power RF Connectors RF Termination Load For WiFi Routers
|
Female SMT Type IPX High Power RF Connector rf termination load for WiFi Routers Product Details: Product name: DALEE RF Connector Secification: three generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC ......
Dalee Electronic Co., Ltd.
|
0.5 Watts DC - 40GHz RF Termination Load K2.92mm Male Chip Resistor
|
RF Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load...
Xi'an Elite Electronic Industry Co., Ltd.
|
PIM 160DBC RF Termination Load / UHF Dummy Load 4.3 - 10 DIN Connector
|
100W high power RF Load with PIM 160dBc 4.3-10connector 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm. 4. Frequency :0-3000G 5. Connector :4.3-10 male New ......
Lenolink Telecommunication Co.,Ltd
|
DC-6GHz 100W 4.3-10 Female Dummy Load / Termination Load
|
... power load when testing other RF products or stop the RF power radiation when some port is not used at present .RF Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop some port in the RF system...
HeFei Vinncom Electronic Technology Co.,Ltd.
|
SMA male RF Termination
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load......
Terui International Group Co.,Ltd.
|
Brass 2 Watt RF Termination DC-3GHz 50 Ohm
|
2Watt SMA 3GHz coaxial Termination Zysen offer DC-18 GHz, 2W terminations, available with 50 impedance SMA Male & Female connectors. With Great VSWR 1.10 Max Electrical Specifications Frequency Range DC – 3GHz Power 2W CW at 25°C (Derated linearly to 0.2W......
Chengdu Zysen Technology Co., Ltd.
|
Submit your “brass rf termination load” inquiry in a minute :