Electric / Optical Fibre Cables Circuit Integrity Vertical Burn Test Equipment IEC 60331
|
... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0.6...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
IEC 60331 Cable Circuit Integrity Fire Resistance Test Machine BS 6387 Cable Fire Resistance Test Equipment
|
...Cable Circuit Integrity Fire Resistance Tester Application The tester is designed according to GB/T 19216.11-2003/IEC 60331-11:1999 "Line integrity test of cables and optical cables under flame conditions Part 11: test apparatus - individual fire supply with flame temperature not lower than 750℃". It fully conforms to GB/T 19216.21-2003/IEC 60331-21:1999 "Line integrity test of cables and optical cables under flame conditions" Testing...
SKYLINE INSTRUMENTS CO.,LTD
|
Cable Circuit Integrity Flame Testing Equipment IEC 60331 For Regulatory Agencies
|
...Cable Circuit Integrity Fire Resistance Testing Machine For Fire Safety And Regulatory Agencies In the field of electrical engineering and fire safety, the IEC 60331 Cable Circuit Integrity Fire Resistance Testing Machine is a crucial apparatus. It is designed to evaluate the ability of cables to maintain circuit integrity......
Dongguan Precision Test Equipment Co., Ltd.
|
IEC 60331 Burning Testing Equipment For Electric / Optical Fibre Cables Circuit Integrity
|
... whether keep circuit integrity under fire conditions. Standards: GB/T19216 Test for electric or optical fibre cables under fire conditions---Circuit Integrity--Procedures and requirement for fire with shock--Cables of rated voltage up to and including 0...
Dongguan Hust Tony Instruments Co.,Ltd.
|
Cable Circuit Integrity Fire Resistance Testing Equipment by IEC 60331& BS 6387
|
Circuit Integrity Under Fire Conditions Testing Equipment INTRODUCTION This cable fire resistance testing equipment to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C. IEC 60331 Test for electric cables...
Advanced Instruments Co.,Limited
|
IEC 60331 BS 6387 BS 8491 Wire Cable Circuit Integrity Tester For Multi Core Cable Testing Fire Resistance Burn Test Equipment
|
... test bench includes the following parts) 1.1 Cable Support System 1.2 Continuous Detection Device 1.3 Heat Source Cable support system: The cable is clamped horizontally at both ends of the cable sheath by a clamp. The middle part of the cable is fixed by...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
CFRT IEC 60331 Electric Cable Fire Resistance Testing Equipment
|
... circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C....
Delta Technology (Chongqing) Co., Ltd.
|
RS-TC Cable Testing Equipment Cable Fault Locator Test Equipment
|
... of the cable-circuit. Once the circuit breaks down and without punctually examination and repairing, it will no doubt trigger the mass economic loss and bad social influence. So the electric fault measuring testing instrument is a very important tool. The...
Wuhan Rising Electric Co., Ltd.
|
Astm D5882 Standard Pile Integrity Testing Equipment 12.6v 5200mah
|
...Integrity Testing Equipment Imported Accelerometer Lpt Low Strain Pile Integrity Testing Equipment's Introduction Characteristic Pile Integrity Testing Equipment's Standard Characteristic The accelerometer of the Pile Integrity Testing Equipment is imported from America, with its stable function and high precision. The Pile Integrity Testing Equipment's sampling length is 4096points, the Pile Integrity...
Beijing Samyon Instruments Co., Ltd.
|
Wire And Cable Fire Resistance Testing Equipment Testing The Fire Resistance Characteristics Of Mineral Insulated Cable
|
... Test Methods for Fire Resistance Characteristics of Electric Wire and Cable, GB/T 5013-2006 Test Standards for Rubber Insulated Cables with Rated Voltages of 450/750V and Below - Extra Flexible Wires, GB/T 19216.21-2003 Test Methods for Line Integrity of...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Submit your “cable circuit integrity testing equipment” inquiry in a minute :