Vertical Material Plastic Testing Equipment , Combustion Flammability Test Equipment
|
... for measuring and evaluating the combustion characteristics of plastic materials. It is designed and made based on the America UL94standard the combustion characteristics’ testing of plastic materials used for device and equipment parts. It tests the...
Dongguan Liyi Environmental Technology Co., Ltd.
|
500W Coal Mine Wire and Cable Fire Burning Testing Equipment withMT386 MT318
|
... retardancy of coal mine flame-retardant cable" standard. It is used to test the combustion characteristics of MT 818-2009 "Coal Mine Cable" under overload conditions. . Structure: 1. Control chamber, equipped with power source and thermometer, which can...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Wire And Cable Smoke Density Testing Equipment Mainly Used To Determine The Concentration Of Smoke Released By Cables
|
...cable smoke density testing equipment Application scope : Mainly used to determine the concentration of smoke released by cables and optical cables during combustion under specific conditions. Compliance with standards: Meet the requirements of GB/T17651.1-1998 and IEC61034-1-2 "Measurement of Smoke Density of Cables and Optical Cables under Specific Conditions of Combustion" test standards. Main features: This testing...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 60332 Single Wire Vertical Combustion Tester Single Cable Vertical Flame Test Equipment
|
...Combustion Tester Single Electrical Cable Vertical Flame Test Equipment Product Description Test standard GB18380.11\12\13_2022 "Cable Burning Test under Flame Conditions - Part 1: Vertical Burning Test Method for Single Insulated Cable or Cable Assembly" is equivalent to IEC60332.1-2004. IEC 60332 Single Wire Vertical Combustion Tester Single Electrical Cable Vertical Flame Test Equipment......
DONGGUAN LONROY EQUIPMENT CO LTD
|
UL1581 Cable Burning Flammability Test Equipment
|
...Cable Burning Test Chamber Wire Flammability Test Equipment Product information: The device is designed and manufactured in accordance with UL1581 standards and related requirements. It is applicable for the finished wire and cable, or soft-line to do 1060 vertical combustion and FT1 test, 1061 cable combustion test, 1080VW-1(vertical specimen) combustion test, 1090 electric wire horizontal specimen combustion test......
Guangzhou Shice Equipment Co., Ltd.
|
Microcomputer Plastic Testing Machine , Combustion Flammability Test Equipment
|
...Testing Machine , Combustion Flammability Test Equipment 1.Introduction: The combustion tester is used for burning several flame at a certain height and angle of the test specimen when the specimen is horizontal or vertical by using the required size of the Bunsen burner (Bunsen burner) and the specific gas source (methane or natural gas). the ignition of bedding under the hot combustion......
Guangdong Haida Equipment Co., Ltd.
|
Battery Combustion Jet Test Equipment By IEC60086-4 UL1642 UL 2054
|
... holes every 25.4mm, and the diameter of the steel wire is 0.43mm), and then light the burner below it (38.1mm above the top of the burner). At the same time, observe the battery combustion until the...
Advanced Instruments Co.,Limited
|
Combustion Flammability Test Equipment PLC Control Accurate Timing
|
... to test the burning performance of children's clothing or toys and their accessories, and evaluate the burning speed and time of the following toy types. Test sample 1. Clothes worn by children (fabricated dresses), especially shawls, drape clothes and...
Dongguan Kingpo Technology Limited
|
Cable Fire Resistance Test Equipment UL 2556 / UL 1581
|
...combustion tester is produced in strict accordance with UL standards It fully complies with the VW-1 combustion test standard and can complete VW-1 and FT-2 tests. It is economical and widely used by the wire and cable industry. The parameters are detailed as follows: The entire test is carried out in a sealed test chamber with a volume of 4.32 cubic meters. Test......
SKYLINE INSTRUMENTS CO.,LTD
|
IEC 61851-23 Cable Anchorage Test System EVSE Cable Pull & Torque Test Equipment
|
...Cable Anchorage Test System EVSE Cable Pull & Torque Test Equipment Complied Standards & Clauses It is designed and manufactured according to IEC 61851-23:2023 clause 11.6.102 and Figure 110, Figure 111 and Table 114. Product overview The Cable Anchorage Pull Force and Torque Test Apparatus (Model SNQC1007B) is a high-precision testing......
Sinuo Testing Equipment Co. , Limited
|
Submit your “cable combustion characteristics testing equipment” inquiry in a minute :