0.4KW 10KN Glass Ceramic Bend Tester With Special Jig
|
...Bend Testing Machine With Special Jig Universal Testing Machine Product Description The bend testing machine is used to test bending fatigue, bend strength of brittle materials, such as ceramics, glass, timber. The bend testing can do test of central point bending and three-piont bending......
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Hydraulic Ceramic Bending Tester 10kN with ISO CE Certification
|
The hydraulic and air pressure system of the machine can load average, which can reach the standard of GB/T3810.4-2016, ISO10545-4:2014 ceramic tile testing requirement. It is widely used in the MOR testing of ceramic pipe, glaze tile, sanitary ware, ......
Hai Da Labtester
|
CKZ-10000 ISO 10545 Intelligent Ceramic Impact Tester Ceramic Tile Bending Testing Machine
|
... screen microcomputer for control, calculation and display. It complies with GB/T 3810.4-2016 / ISO 10545-4:2014 "Test methods for ceramic tiles - Determination of flexural modulus and breaking strength", and is also applicable for measuring the...
DONGGUAN LONROY EQUIPMENT CO LTD
|
ISO 10545 Digital Display Ceramic Anti bending Tester 1000N Max. Load
|
... ceramic tiles-determination of modulus of rupture and breaking strength. It is also widely used in ceramic tubes, glazed tiles, building and sanitary ceramics, electric porcelain, household ceramics, refractory materials, etc. For the determination of the...
Dongguan Zhongli Instrument Technology Co., Ltd.
|
IEC 60884-1 Bending Test Apparatus bend tester without screw thread
|
...Bending Test Apparatus bend tester without screw thread Production introduction: According to the provisions of IEC 60884-1, GB2099.0-1996,12.3.12 provisions of the non threaded terminal bending testing machine. The test machine without screw thread is mainly used for the bending......
Guangzhou HongCe Equipment Co., Ltd.
|
AS/NZS 3112:2011 Standard Force For Pin Bending Tester Clause 2.13.7.2
|
... tests shall be tested as follows: Pins of assembled plugs shall be tested by clamping the plug in a rigid holding block and applying a bending force, as shown in Figure 2.8, to the pin under test. The pins shall be...
KingPo Technology Development Limited
|
Leather Testing Equipment Bending Tester JIS-K6545 12 Sets Grips 70 x 45 mm
|
... bending test, observe the material damage, record the bending times while broke. Standard: CNS-7705,JIS-K6545,BS-3144 Specification: Model RS-8232 Test Speed 100±5cpm Grips (optional) 6 sets or 12 sets Specimen 70x45mm Bending Angle 22.5°...
Infinity Machine International Inc.
|
Wire Bending Test Machine/ Plug Lead Bending Tester/ Plug Bending Tester
|
...Bending Tester This tester complies with UL817 and other relevant standards "General Safety Requirements for Flexible Cord Components and Power Cords". It is suitable for power cords and DC cords to conduct bending test by relevant manufacturers and quality inspection departments. This machine specializes in testing plug lead wire and cable bending......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Load Wire Bending Tester 10°-180° Manually Adjustable ±1° JD-3001F
|
... and other related standards "General safety requirements for cord components and power cords". Applicable to the relevant manufacturers and quality inspection departments to bend the...
Dongguan jie dong test equipment co.,LTD
|
Conveyor Drum Ceramic Bend Pulley Lagging Rubber Sheet
|
...ceramic bend pulley lagging rubber coating sheet Advantage: 1. Factory specialized in producing various pulley lagging since 2001. 2. We have our own ceramic laboratories and rubber laboratories to test and analyze the material and ensure quality 3. Premium raw material and mature production line ensure high quality 4. Extensive experience in producing ceramic......
Jiaozuo Debon Technology Co., Ltd.
|