IEC 60702-1 Clause 13.6 Bending Test Equipment For Vehicle Charging Cables
|
... is used to test the bending performance of copper core or copper alloy sheathed mineral insulated general wiring cables to verify their reliability. It uses the motor to ......
Sinuo Testing Equipment Co. , Limited
|
Clause 13.4 Tracking Test Equipment Determination Of The Relative Resistance To Tracking Performance
|
...clause 13.4 Tracking Test Equipment Standard: Conforms to IEC 60065:2014 clause 13.4, IEC60335-1 clause 29.2, Annex N Application: It is used for determination of the relative resistance to tracking performance that solid electrical insulating material under the action of an electric field, when the surface exposed to water containing impurities. Test sample: Lighting equipment......
Guangzhou HongCe Equipment Co., Ltd.
|
C60598-1 Clause 4.14.3 Bending Test Equipment For Adjusting Luminaire
|
Bending Test Equipment for Adjusting Luminaire Conforms to IEC60598-1 Clause 4.14.3 1. Introduction The bending test equipment for adjusting luminaire is designed to meet the test requirement of IEC60598-1 clause 4.14.3. The flexible cord or cable of adjusting luminaire shall have no more than 50% of the strands in a conductor be broken and no serious damage to the insulation after continuously bending......
Pego Electronics (Yi Chun) Company Limited
|
IEC60695-2-13 Glow Wire Testing Equipment Heat Resistance Test Apparatus
|
... index (GWFI) test method for materials” IEC60695-2-13 “Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials” IEC60695-2-10 “Fire hazard testing - Part 2-10:...
Sinuo Testing Equipment Co. , Limited
|
Manual Control 60811 IEC Test Equipment Cold Bend Testing Apparatus
|
... Methods for general application-Test at low temperature clause 8.1 and 8.2 and figure 1. Figure 1 Cold Bend Test Apparatus Application: This test is intended in general for cables with an overall diameter up to and including 12.5 mm, or for flat cables, a...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Multifunctional Lab Test Equipment Ground Recessed Luminaires Light Test
|
Ground Recessed Luminaires Light Tester HDJ0007 Standard: IEC 60598-2-13 clause 13.6.1 and clause 13.6.2, figure 1~4 Application: This device is suitable for static load test, torque test and shear load test to ground accessed luminaires. Test sample: ......
shanghai kerang technology co ltd
|
IEC60335-2-2 cl.21.103 Vacuum Cleaner Equipment / Current - Carrying Hose Bending Test Machine
|
... to the requirements of IEC60335-2-2/GB4706.7:201.103, UL1017-8.13.1.3. The test will be carried out on the pivot arm of the current-carrying hose fixing device. The distance between the arm shaft and the hose into the rigid part is 305 (+0 ~ -0.5)...
KingPo Technology Development Limited
|
Ground Recessed Luminaires Led Testing Equipment
|
... Max. load 20KN Rubber punch diameter 50mm, thickness 50mm Maintain time 5-10s for torque test, 1min for static load test Station 1 station Standard IEC 60598-2-13 Clause 13.6.1, 13.6.2 Control Mitsubishi PLC Display Touch screen Production introduction:...
Guangzhou Shice Equipment Co., Ltd.
|
Shoe Flexing Tester Prior Heel Footwear Testing Equipment , 30° 45° 60° 90° Bending angle
|
..., or measure the fracture part of the specimen and the fracture level to improve quality. Specification: Specimen: can test two pairs of shoes at a time, children’s shoes 4~13 yards, adult shoes 1~12yards(UK size); Bending angle: 30°, 45°, 60°, 90°(...
Dongguan Hust Tony Instruments Co.,Ltd.
|
BS - 3144 Standard Leather Testing Equipment For Flexing Resistance Test with 12 Groups
|
... 20-1,ISO 17694,EN 13512 ,EN344-1 section 5.13.1.3 and annex C,EN ISO 20344 section 6.6.2.8,AS/NZS 2210.2 section 6.6.2.8,ASTM D 6182 Technical Specifications: Model GX-5025 Fixture 12 Groups Specimens test block 70×45mm Bending Angle 22.5°...
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
Submit your “clause 13 6 bending test equipment” inquiry in a minute :