N Type Male Coaxial RF Termination Load – 1W Power Rating
|
... line, making it ideal as an energy-absorbing component in high-frequency systems. Widely used for precision testing and measurement of microwave devices, RF systems, and indoor distributed terminals....
Xi'an Sipu RF Technology Co., Ltd.
|
DC-3Ghz 50W N Male Connector Coaxial RF Dummy Load with 50 ohm
|
...Coaxial RF Dummy Load with 50 ohm 50W RF Dummy Load (N, DC-3GHz) are used in a wide variety of measurement systems; any port of a multi-port microwave device that is not involved in the measurement should be terminated in its characteristic impedance in order to ensure an accurate measurement. Terminations are also used in devices such as directional couplers and isolators SPECIFICATIONS Dummy Load......
SHENZHEN ZD TECH CO., LTD
|
0.5 Watts DC - 40GHz RF Termination Load K2.92mm Male Chip Resistor
|
RF Load 0.5 Watts DC-40GHz K(2.92mm) Male VSWR ≤ 1.3 Chip Resistor RF load/termination (also known as a dummy load) from Xi'an Elite Electronic is just part of a wide selection of coaxial terminator products supplied for radio, antenna and other types of RF components for typical use, production, laboratory test and measurement, etc. Our coaxial radio requency load termination is manufactured in a RF load design. The low-power matched RF load...
Xi'an Elite Electronic Industry Co., Ltd.
|
50W RF Low Pim 50ohm Calibration 50W 7/16 DIN Male RF Coaxial Termination Dummy RF Terminal Load
|
FEATURES: ★Wide frequency band, wide coverage. ★PIM optimized design. ★Ideal for all kind of IBS/DAS/PDAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) 350-6000 VSWR......
Anhui Bonfire Technology Co., Ltd
|
Alum N Male 450~2600MHz Rf Termination Load
|
... radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to...
HeFei Vinncom Science And Technology Co.,LTD
|
Female SMT Type IPX High Power RF Connectors RF Termination Load For WiFi Routers
|
Female SMT Type IPX High Power RF Connector rf termination load for WiFi Routers Product Details: Product name: DALEE RF Connector Secification: three generation Type : Female Certification: ISO9001,UL,ROHS and the latest REACH Voltage Rating: 60 VAC ......
Dalee Electronic Co., Ltd.
|
PIM 160DBC RF Termination Load / UHF Dummy Load 4.3 - 10 DIN Connector
|
100W high power RF Load with PIM 160dBc 4.3-10connector 1. 200w high power RF load , the PIM is 150-160dBc .With very good performance . 2. The VSWR is <1.2 3. Intermodulation is 150-160dBc@2X43dBm. 4. Frequency :0-3000G 5. Connector :4.3-10 male New ......
Lenolink Telecommunication Co.,Ltd
|
SMA male RF Termination
|
RF Coaxial Terminations SMA RF Termination Load is a threaded RF coaxial connector with an outer conductor inner diameter of 4.13 mm (0.163 inch) and a characteristic impedance of 50 Ω. It is usually considered to be a component mounted on the cable or installed on the instrument, as a transmission line electrical connection or separation of the components, mainly as a bridge. SMA interface standard: SMA RF Termination Load......
Terui International Group Co.,Ltd.
|
50ohm 10 Watt Dummy Load Connector N Coaxial Fixed Terminations 17×53.3mm
|
Coaxial Fixed Terminations Series 50Ω 10w Connector N DC-6 Max VSWR1.2 17×53.3mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport microwave devices such as circulators and directional couplers to make these ports which are not involved in the measurement be terminated......
Shenzhen Yulongtong Electron Co., Ltd.
|
DC-6GHz 100W 4.3-10 Female Dummy Load / Termination Load
|
... power load when testing other RF products or stop the RF power radiation when some port is not used at present .RF Dummy load also will absorb some power and getting heating when RFA system works, so when use dummy load to stop some port in the RF system...
HeFei Vinncom Electronic Technology Co.,Ltd.
|
Submit your “coaxial rf termination load” inquiry in a minute :