OEM High Power DC RF Dummy Load 26GHz 10W SMA Female
|
26GHz 10W SMA Female RF Dummy Load Wide band Good VSWR Good water resistance Part Number VN-DL-26G-10W-OSF Operating Frequency DC-26 GHZ Impedance ( Ohm ) 50 Application Indoor & Outdoor Degree of Protection IP65 Handling Power (Watt, max) ......
HeFei Vinncom Electronic Technology Co.,Ltd.
|
610A DC Battery Dummy Load Bank Adjustable Resistive With Control Cabinet
|
610A,DC Variable Resistive Dummy Battery Load Banks With Control Cabinet Structure 1.An assembly-type enclosure contains DR series or DQ series or AS series or other high power ......
Shenzhen Zenithsun Electronics Tech.CO.,LTD
|
DC 3G Dummy Load 50 Ohm 1000W
|
Coaxial Fixed Terminations Series 50Ω 1000w Connector 7/16 DC-3 Max VSWR1.3 400×410×147mm Coaxial fixed terminationsabsorb RF＆ microwave energy and are commonly used as dummy loads of antenna and transmitter. Also used as mach ports in many multiport ......
Shenzhen Yulongtong Electron Co., Ltd.
|
Customized Size RF Dummy Load Termination Coaxial Cable Assembly 698-3800mhz
|
DC-3ghz 5w n type connector coaxial rf dummy load termination RF coaxial cable assembly (7/16 DIN/N/TNC/BNC/FME/U.FL/IPEX/L9/SMA/SMB/MMCX/MCX/OEM) We focus on coaxial assemblies Our custom RF cable assemblies are built-in and shipped worldwide RF cable ......
SHENZHEN ZD TECH CO., LTD
|
DIN Female Connector DC-3.8GHz 100 Watt Dummy Load
|
...DC-3.8GHz DC-4GHz RF Dummy Load Termination Dummy load/Low PIM Termination/Load is a device used to stop some port as a RF power load when testing other RF products or stop the RF power radiation when some port is not used at present , the theory is matching similar impedance to real device that will be connected to the RF System. Dummy load......
HeFei Vinncom Science And Technology Co.,LTD
|
Continuous Working Dummy Load Bank , Manual Variable Resistive Load Bank
|
..., generator sets for all main electrical parameters including the dynamic parameters tested. Application AC400V - 500kW Dummy Load Bank can be used with a computer to realize automatically completing the special test and the intelligent control to all...
Hebei Kaixiang Electrical Technology Co., Ltd
|
10W Dummy Load High Power RF Load PIM 155dBc DIN Connector IP65 Outdoor Application
|
... termination to properly terminate the output port of a device or to terminate one end of an RF cable. Lenolink Termination loads are characterized by low VSWR, high power capacity and performance stability. Widely used for GMS/DCS/UMTS/WIFI/WIMAX etc....
Lenolink Telecommunication Co.,Ltd
|
Grey Communication Dummy Load RF Coaxial Cable Attenuator N Male to Female DC-3800MHz
|
Features: ★Wide frequency band, wide coverage ★PIM optimized design. ★Ideal for all kind of DAS applications. ★Low insertion loss. ★High power handling. ★Small size, Low weight. ★Good stability. Specifications: Frequency Range(MHz) DC-3800 VSWR ≤ 1.25 ......
Anhui Bonfire Technology Co., Ltd
|
48V 200A battery test dummy load bank
|
Introduction 48V 200A battery test dummy load bank (namely battery discharger, battery load bank, battery discharge tester), is designed for the capacity test and maintenance of continuous battery sets through intensive discharging. The unit features in ......
Hebei Kaixiang Electrical Technology Co., Ltd
|
DC 6GHz N Type BNC Dummy Load Aluminum 100 Watt Dummy Load
|
100W DC-6GHz N type Coaxial Termination DC-3GHz, 6GHz,12GHz,18GHz are available with N connector, SMA are available up to 40GHz. Zysen also offer a series Coaxial Termination frequency up to 67GHz , Power handling from 0.5 to 2000watts,connector SMA,N, 2.......
Chengdu Zysen Technology Co., Ltd.
|